Document
InterFET
Product Folder
Technical Support
Order Now
P0099F
P0099F Process Geometry
Features
• Low Noise: 2.0 nV/√Hz Typical • Typical Input Capacitance: 18pF • Typical Breakdown Voltage: 60V • High Input Impedance • Small Die: 492um X 492um X 203um • Bond Pads: 90um X 90um • Substrate Connected to Gate • Au Back-Side Finish
Applications
• General Purpose Amplifier • Switching • Matched Pair Applications • Custom Part Options
Description
The InterFET P0099F Geometry is ideal for switching and general purpose amplification applications.
Geometry Top View
P99
G
S-D
S-D
G
Test
Pattern
Standard Parts
• 2N3993/A, 2N3994/A • 2N5114, 2N5115, 2N5116 • IFN44 • J174, J175, J176, J177 • P1086, P1087 • 2N5019 • VCR3P
Product Summary
Parameters
BVGSS Gate to Source Breakdown Voltage
IDSS Drain to Source Saturation Current
VGS(off) Gate to Source Cutoff Voltage
GFS
Forward Transconductance
Min
Typ
Max
Unit
45
60
V
-5
-60
mA
1
8
V
13
mS
Maximum Ratings (@ TA = 25°C, Unless otherwise specified)
Parameters
Min
Typ
Max
Unit
VRGS Reverse Gate to Source or Drain Voltage
45
60
V
IFG Continuous Forward Gate Current
10
mA
TJ Operating Junction Temperature
-55
150
°C
TSTG Storage Temperature
-65
175
°C
Disclaimer: It is the Buyers responsibility for designing, validating and testing the end application under all field use cases and extreme use conditions. Guaranteeing the application meets required standards, regulatory compliance, and all safety and security requirements is the responsibility of the Buyer. These resources are subject to change without notice.
IF35523.R01
InterFET
Product Folder
Technical Support
Order Now
Electrical Characteristics
Static Characteristics (@ TA = 25°C, Unless otherwise specified)
Parameters
Conditions
Min
Typ
BVGSS
Gate to Source Breakdown Voltage
IG = -1μA, VDS = 0V
45
60
IGSS
Gate to Source Reverse Current
VGS = -10V, VDS = 0V
500
VGS(OFF)
Gate to Source Cutoff Voltage
VDS = 10V, ID = 1nA
1
IDSS
Drain to Source Saturation Current
VDS = 10V, VGS = 0V
5
Dynamic Characteristics (@ TA = 25°C, Unless otherwise specified)
Parameters
Conditions
Min
Typ
GFS
Forward Transconductance
VDS = 10V, VGS = 0 V, f = 1kHz
13
Ciss Input Capacitance
VDS = 10V, VGS = 0 V, f = 1MHz
18
Crss
Reverse Transfer Capacitance
VDS = 0V, VGS = -10 V, f = 1MHz
4.5
en Noise Voltage
VDS = 10V, ID = 5mA f = 1kHz
2.0
P0099F
Max
Unit
V
1000
pA
8
V
60
mA
Max
Unit
mS
pF
pF
nV/√Hz
P0099F
Document Number: IF35523.R01
2 of 5
www.InterFET.com
InterFET Corporation
November, 2019
InterFET
Product Folder
Typical P0099F Characteristics
Technical Support
Order Now
P0099F
Drain Current, ID (mA) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10
Drain Current, ID (mA) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10
Drain Current, ID (mA) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10
Drain Current, ID (mA) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10
Typical Output @ VGS(OFF) = 0.8V
-4
VGS = 0.0V
-3.5
-3
-2.5
VGS = 0.2V
-2
-1.5
VGS = 0.4V
-1
VGS = 0.6V
-0.5
0
Drain to Source Voltage, VDS (V)
Typical Output @ VGS(OFF) = -4.5V
-40
VGS = 0.0V
-35
-30
-25
VGS = 1.5V
-20
-15
VGS = 3.0V
-10
VGS = 4.2V
-5
0
Drain to Source Voltage, VDS (V)
Typical IDSS - VGS(OFF)
-50
-45
VGS = 0V
-40
VDS = -15V
-35
-30
-25
-20
-15
-10
-5
0
Gate to Source Voltage, VGS(OFF) (V)
Typical Output @ VGS(OFF) = -2.5V
-18
-16
VGS = 0.0V
-14
-12
VGS = 0.8V
-10
-8
-6
VGS = 1.5V
-4
VGS = 2.2V
-2
0
Drain to Source Voltage, VDS (V)
Typical Output @ VGS(OFF) = -6.0V
-60
-50
VGS = 0.0V
-40 VGS = 2.0V
-30
-20
VGS = 3.8V
-10
VGS = 5.5V
0
Drain to Source Voltage, VDS (V)
Typical GFS - VGS(OFF)
14
12
10
VGS = 0V
8
VDS = -15V
6
f = 1kHz
4
2
0
Gate to Source Voltage, VGS(OFF) (V)
Drain Current, IDSS (mA) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Transconductance, GFS (mS) 0.0 0.6 1.4 2.2 3.0 3.8 4.6 5.4 6.2 7.0
P0099F
Document Number: IF35523.R01
3 of 5
www.InterFET.com
InterFET Corporation
November, 2019
InterFET
Product Folder
Technical Support
Order Now
P0099F
Typical P0099F Characteristics (Continued)
On Resistance DS(ON) R (Ohms) 0.0 0.6 1.4 2.2 3.0 3.8 4.6 5.4 6.2
Noise Voltage, en (nV/√Hz)
0.01 0.1 1 10 100
Typical RDS(ON) - VGS(OFF)
200.0 180.0 160.0 140.0 120.0 100.0
80.0 60.0 40.0 20.0
0.0
VGS = 0V f = 1kHz
Gate to Source Voltage, VGS(OFF) (V)
Typical CiSS - VGS
14.0
12.0
VDS = -10V
10.0
f = 1MHz
8.0
6.0
4.0
2.0
0.0
Gate to Source Voltage, VGS (V)
Typical Noise (nV/√Hz)
20
ID = 5mA
15
VDS = -10V
10
5
0
Frequency, f (kHz)
Typical CrSS - VGS
3.0
2.5
VDS = -10V
f = 1MHz 2.0
1.5
1.0
0.5
0.0
Gate to Source Voltage, VGS (V)
Input Capacitance, CiSS (pF) 0 2 4 6 8 10
Capacitance, CrSS (pF) 0 2 4 6 8 10
P0099F
Document Number: IF35523.R01
4 of 5
www.InterFET.com
InterFET Corporation
November, 2019
InterFET
Product Folder
Technical Support
Or.