LM3508

LM3508 www.ti.com SNVS494C – APRIL 2007 – REVISED MAY 2013 LM3508 Synchronous Magnetic Constant Current White LED Driver Check for Samples: LM3508 FEATURES 1 2 Drives 4 Series White LEDs with up to 30mA >80% Peak Efficiency Up to 100kHz PWM Brightness Control Accurate ±5% LED Current Regulation across VIN range Internal Synchronous PFET (No Schottky Diode Required) True Shutdown Isolation Output Short-Circuit Protection 17.5V Over-Voltage Protection Internal Soft-Start Eliminates Inrush Current Wide Input Voltage Range: 2.7V to 5.5V 850kHz Fixed Frequency Operation Low Profile 9-Bump DSBGA Package (1.514mm x 1.514mm x 0.6mm) DESCRIPTION The LM3508 is a synchronous boost converter (no external Schottky diode required) that provides a constant current output. It is designed to drive up to 4 series white LEDs at 30mA from a single-cell Li-Ion battery. A single low power external resistor is used to set the maximum LED current. The LED current can be adjusted by applying a PWM signal of up to 100kHz to the DIM pin. Internal soft-start circuitry is designed to eliminate high in-rush current at start-up. For maximum safety, the device features an advanced short-circuit protection when the output is shorted to ground. Additionally, over-voltage protection and an 850kHz switching frequency allow for the use of small, low-cost output capacitors with lower voltage ratings. During shutdown, the output is disconnected from the input preventing a leakage curren...