Amplifier
LM359
www.ti.com
SNOSBT4C – MAY 1999 – REVISED MARCH 2013
LM359 Dual, High Speed, Programmable, Current Mode (Norton)...
Description
LM359
www.ti.com
SNOSBT4C – MAY 1999 – REVISED MARCH 2013
LM359 Dual, High Speed, Programmable, Current Mode (Norton) Amplifiers
Check for Samples: LM359
FEATURES
1
2 User Programmable Gain Bandwidth Product, Slew Rate, Input Bias Current, Output Stage Biasing Current and Total Device Power Dissipation
High Gain Bandwidth Product (ISET = 0.5 mA) – 400 MHz for AV = 10 to 100 – 30 MHz for AV = 1
High Slew Rate (ISET = 0.5 mA) – 60 V/μs for AV = 10 to 100 – 30 V/μs for AV = 1
Current Differencing Inputs Allow High Common-Mode Input Voltages
Operates from a Single 5V to 22V Supply
Large Inverting Amplifier Output Swing, 2 mV to VCC − 2V
Low Spot Noise, 6 nV /√Hz, for f > 1 kHz
APPLICATIONS
General Purpose Video Amplifiers
High Frequency, High Q Active Filters
Photo-Diode Amplifiers
Wide Frequency Range Waveform Generation Circuits
All LM3900 AC Applications Work to Much Higher Frequencies
DESCRIPTION
The LM359 consists of two current differencing (Norton) input amplifiers. Design emphasis has been placed on obtaining high frequency performance and providing user programmable amplifier operating characteristics. Each amplifier is broadbanded to provide a high gain bandwidth product, fast slew rate and stable operation for an inverting closed loop gain of 10 or greater. Pins for additional external frequency compensation are provided. The amplifiers are designed to operate from a single supply and can accommodate input common-mode voltages greater than t...
Similar Datasheet