DC Motor Driver
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DRV8814
SLVSAB9E – MAY 2010 – ...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DRV8814
SLVSAB9E – MAY 2010 – REVISED NOVEMBER 2015
DRV8814 DC Motor Driver IC
1 Features
1 8 V to 45 V Operating Supply Voltage Range 2.5 A Maximum Drive Current at 24 V and TA =
25°C Dual H-Bridge Current-Control Motor Driver
– Drives Two DC Motors – Four Level Winding Current Control Multiple Decay Modes – Slow Decay – Fast Decay Industry Standard Parallel Digital Control Interface Low Current Sleep Mode Built-In 3.3-V Reference Output Small Package and Footprint Protection Features – Overcurrent Protection (OCP) – Thermal Shutdown (TSD) – VM Undervoltage Lockout (UVLO) – Fault Condition Indication Pin (nFAULT)
2 Applications
Printers Scanners Office Automation Machines Gaming Machines Factory Automation Robotics
3 Description
The DRV8814 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and is intended to drive DC motors. The output driver block for each consists of N-channel power MOSFET’s configured as H-bridges to drive the motor windings. The DRV8814 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper heatsinking at 24 V and 25°C) per H-bridge.
A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable to allow braking or coasting of the motor when disabled.
Internal shutdown ...
Similar Datasheet