Buck Controller. TPS51216 Datasheet

TPS51216 Controller. Datasheet pdf. Equivalent

Part TPS51216
Description Memory Power Solution Synchronous Buck Controller
Feature www.ti.com TPS51216 SLUSAB9A – NOVEMBER 2010 – REVISED APRIL 2013 Complete DDR2, DDR3 and DDR3L Me.
Manufacture etcTI
Datasheet
Download TPS51216 Datasheet



TPS51216
www.ti.com
TPS51216
SLUSAB9A – NOVEMBER 2010 – REVISED APRIL 2013
Complete DDR2, DDR3 and DDR3L Memory Power Solution Synchronous Buck
Controller, 2-A LDO, Buffered Reference
Check for Samples: TPS51216
FEATURES
1
2 Synchronous Buck Controller (VDDQ)
– Conversion Voltage Range: 3 V to 28 V
– Output Voltage Range: 0.7 V to 1.8 V
– 0.8% VREF Accuracy
– D-CAP™ Mode for Fast Transient Response
– Selectable 300 kHz/400 kHz Switching
Frequencies
– Optimized Efficiency at Light and Heavy
Loads with Auto-skip Function
– Supports Soft-Off in S4/S5 States
– OCL/OVP/UVP/UVLO Protections
– Powergood Output
• 2-A LDO(VTT), Buffered Reference(VTTREF)
– 2-A (Peak) Sink and Source Current
– Requires Only 10-μF of Ceramic Output
Capacitance
– Buffered, Low Noise, 10-mA VTTREF
Output
– 0.8% VTTREF, 20-mV VTT Accuracy
– Support High-Z in S3 and Soft-Off in S4/S5
• Thermal Shutdown
• 20-Pin, 3 mm × 3 mm, QFN Package
APPLICATIONS
• DDR2/DDR3/DDR3L Memory Power Supplies
• SSTL_18, SSTL_15, SSTL_135 and HSTL
Termination
DESCRIPTION
The TPS51216 provides a complete power supply for
DDR2, DDR3 and DDR3L memory systems in the
lowest total cost and minimum space. It integrates a
synchronous buck regulator controller (VDDQ) with a
2-A sink/source tracking LDO (VTT) and buffered low
noise reference (VTTREF). The TPS51216 employs
D-CAP™ mode coupled with 300 kHz/400 kHz
frequencies for ease-of-use and fast transient
response. The VTTREF tracks VDDQ/2 within
excellent 0.8% accuracy. The VTT, which provides 2-
A sink/source peak current capabilities, requires only
10-μF of ceramic capacitance. In addition, a
dedicated LDO supply input is available.
The TPS51216 provides rich useful functions as well
as excellent power supply performance. It supports
flexible power state control, placing VTT at high-Z in
S3 and discharging VDDQ, VTT and VTTREF (soft-
off) in S4/S5 state. Programmable OCL with low-side
MOSFET RDS(on) sensing, OVP/UVP/UVLO and
thermal shutdown protections are also available.
The TPS51216 is available in a 20-pin, 3 mm × 3
mm, QFN package and is specified for ambient
temperature from –40°C to 85°C.
VIN
5VIN
PGND
12
TPS51216
V5IN
VBST
15
S3
S5
PGND
17 S3
16 S5
6 VREF
DRVH 14
SW 13
DRVL 11
PGND 10
PGOOD 20
8 REFIN VDDQSNS 9
7 GND
VLDOIN 2
VTT 3
19 MODE VTTSNS 1
VDDQ
Powergood
VTT
18 TRIP
VTTGND 4
VTTREF 5
VTTREF
PGND
AGND
AGND
UDG-10138
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
D-CAP is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2013, Texas Instruments Incorporated



TPS51216
TPS51216
SLUSAB9A – NOVEMBER 2010 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
TA
–40°C to 85°C
ORDERING INFORMATION(1)
PACKAGE
ORDERABLE DEVICE
NUMBER
PINS
TPS51216RUKR
Plastic Quad Flat Pack (20 pin QFN)
20
TPS51216RUKT
OUTPUT
SUPPLY
Tape and reel
Mini reel
MINIMUM
QUANTITY
3000
250
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
VALUE
UNIT
MIN
MAX
VBST
VBST (3)
–0.3
36
–0.3
6
Input voltage range(2)
SW
VLDOIN, VDDQSNS, REFIN
–5
30
–0.3
3.6 V
VTTSNS
–0.3
3.6
PGND, VTTGND
–0.3
0.3
V5IN, S3, S5, TRIP, MODE
–0.3
6
DRVH
DRVH (3)
DRVH(3) (duty cycle < 1%)
–5
36
–0.3
6
–2.5
6
Output voltage range(2)
VTTREF, VREF
VTT
–0.3
3.6
V
–0.3
3.6
DRVL
–0.3
6
DRVL (duty cycle < 1%)
–2.5
6
PGOOD
–0.3
6
Junction temperature range, TJ
Storage temperature range, TSTG
125 °C
–55
150 °C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to the network ground terminal unless otherwise noted.
(3) Voltage values are with respect to the SW terminal.
THERMAL INFORMATION
THERMAL METRIC
θJA
θJCtop
θJB
ψJT
ψJB
θJCbot
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
TPS51216
QFN (20) PINS
94.1
58.1
64.3
31.8
58.0
5.9
UNITS
°C/W
2
Submit Documentation Feedback
Product Folder Links :TPS51216
Copyright © 2010–2013, Texas Instruments Incorporated





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)