FAST RECTIFIER. SMS1D Datasheet

SMS1D RECTIFIER. Datasheet pdf. Equivalent

Part SMS1D
Description SUPER FAST RECTIFIER
Feature TH97/2478 TH09/2479 IATF 0060636 SGS TH07/1033 SMS1A - SMS1J PRV : 50 - 600 Volts Io : 1.0 Ampere.
Manufacture EIC
Datasheet
Download SMS1D Datasheet



SMS1D
TH97/2478
TH09/2479
IATF 0060636
SGS TH07/1033
SMS1A - SMS1J
PRV : 50 - 600 Volts
Io : 1.0 Ampere
FEATURES :
* Glass passivated junction chip
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Super fast recovery time
* Pb / RoHS Free
SURFACE MOUNT
SUPER FAST RECTIFIERS
SOD-123FL
2.5(0.098)
2.9(0.114)
MECHANICAL DATA :
* Case: JEDEC SOD-123FL, molded plastic
over passivated chip
* Terminals: Solder Plated, solderable per
MIL-STD-750, Method 2026
* Polarity: Color band denotes cathode end
* Mounting position : Any
* Weight: 0.02 gram (Approximate)
0.5(0.020)
max0.1(0.004)
1.1(0.043)
3.5(0.138)
3.9(0.154)
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
Marking
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Current Ta = 55 °C
Maximum Peak Forward Surge Current
8.3 ms. Single half sine wave Superimposed
on rated load (JEDEC Method)
Maximum Peak Forward Voltage at IF = 1.0 A
Maximum DC Reverse Current
at Rated DC Blocking Voltage
Maximum Reverse Recovery Time ( Note 1 )
Typical Junction Capacitance ( Note 2 )
Junction Temperature Range
Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IF(AV)
SMS1A
SA
50
35
50
IFSM
VF
IR
Trr
CJ
TJ
TSTG
Notes :
( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC
SMS1B
SB
100
70
100
SMS1D
SD
200
140
200
SMS1G
SG
400
280
400
1.0
SMS1J
SJ
600
420
600
25
0.98
1.8
5.0
35
50
- 65 to + 150
- 65 to + 150
UNIT
V
V
V
A
A
V
μA
ns
pF
°C
°C
Page 1 of 2
Rev. 03 : Fabruary 11, 2010



SMS1D
TH97/2478
TH09/2479
IATF 0060636
SGS TH07/1033
RATING AND CHARACTERISTIC CURVES ( SMS1A - SMS1J )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50 Ω
10 Ω
+
50 Vdc
(approx)
D.U.T.
1Ω
PULSE
GENERATOR
( NOTE 2 )
OSCILLOSCOPE
( NOTE 1 )
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
Trr
+ 0.5 A
0
- 0.25 A
- 1.0 A
1 cm
SET TIME BASE FOR 15 ns/cm
FIG.2 - DERATING CURVE CURRENT
1.0
0.8
FIG.3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
30
8.3 ms SINGLE HATLaF=SI5N0E°CWAVE
24
0.6
18
0.4
12
0.2
60Hz RESISTIVE OR INDUCTIVE LOAD
0
0 25 50 75 100 125 150 175
AMBIENT TEMPERATURE, ( °C)
6
0
1
2
4 6 10
20
40 60 100
NUMBER OF CYCLES AT 60Hz
FIG.4 - TYPICAL FORWARD CHARACTERISTICS
100
SMS1A -D
SMS1G-J
10
FIG.5 - TYPICAL REVERSE CHARACTERISTICS
10
TJ = 100 °C
1.0
1.0
0.1
0.01
0
Pulse Width = 300 μs
2% Duty Cycle
TJ = 25 °C
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
FORWARD VOLTAGE, (V)
0.1
TJ = 25 °C
0.01
0
20
40
60 80 100 120 140
PERCENT OF RATED REVERSE VOLTAGE,
(%)
Page 2 of 2
Rev. 03 : Fabruary 11, 2010





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)