Document
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR
600 WATT PEAK POWER 5.0 WATTS STEADY STATE
TVS P6FMBJ SERIES
FEATURES
* Plastic package has underwriters laboratory * Glass passivated chip construction * 600 watt surage capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time * P/N suffix V means AEC-Q101 qualified * P/N suffix V means Halogen-free
Ratings at 25 oC ambient temperature unless otherwise specified.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
DO-214AA
0.083 (2.11) 0.077 (1.96)
0.180 (4.57) 0.160 (4.06)
0.155 (3.94) 0.130 (3.30)
0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76)
0.220 (5.59) 0.205 (5.21)
0.012 (0.305) 0.006 (0.152)
0.008 (0.203) 0.004 (0.102)
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix for types P6FMBJ6.8 thru P6FMBJ600
Electrical characteristics apply in both direction
MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) RATINGS
Peak Power Dissipation with a 10/1000uS (Note 1, Fig.1) Peak Pulse Durrent with a 10/1000uS waveform ( Note 1, Fig.3 ) Steady State Power Dissipation at TL = 75oC Peak Forward Surge Current, 8.3mS single half sine wave superimposed on rated load (Jedec Method)(Note 2) unidirectional only
Typical Current Squarad Time Maximum Instantaneous Forward Voltage at 50A for unidirectional only ( Note 3 ) Operating and Storage Temperature Range
SYMBOL PPPM IPPM PM(AV) IFSM I2t VF
TJ, TSTG
VALUE Minimum 600 SEE TABLE 1
5.0 100
41.5 SEE NOTE 4 -55 to + 150
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig.2. 2. Measured on 8.3mS single half Sine-Wave or equivalent wave, duty cycle = 4 pulses per minute maximum. 3. VF = 3.5V on P6FMBJ6.8 thru P6FMB90 devices and VF = 5.0V on P6FMBJ100 thur P6FMB600 devices.
UNITS Watts Amps
Watts
Amps A2/Sec
Volts 0C 2017-12 REV:C
PPPM, PEAK PULSE POWER, KW
IPPM, PEAK PULSE CURRENT,%
RATING AND CHARACTERISTIC CURVES ( P6FMBJ6.8 THRU P6FMBJ600CA )
FIG. 1 - PEAK PULSE POWER RATING CURVE 100
Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25
10
1.0
0.2X0.2"(5.0X5.0mm) copper pad areas
0.1 0.1uS
1.0uS 10uS 100uS TP, PULSE WIDTH
1.0mS
FIG. 3 - PULSE WAVEFORM 150
10mS
100
tr = 10usec.
Peak Value IPPM
Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM
HALF VALUE -IPPM 2
10/1000usec. Waveform as Defined by R.E.A.
50
PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,%
FIG. 2 - PULSE DERATING CURVE 100
75
50
25
0
0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE,( )
6,000
FIG. 4 - TYPICAL JUNCTION CAPACITANCE
f = 1.0 MHz Vsig = 50mVp-p TJ = 25
Measured at Zero Bias
1,000
100
Measured at Stand off Voltage,VWM
CJ, CAPACITANCE, pF
td
0
0
1.0
2.0
3.0
4.0
t, TIME,mS
6,000
FIG. 5 - TYPICAL JUNCTION CAPACITANCE BIDIRECTIONAL
f = 1.0 MHz Vsig = 50mVp-p TJ = 25
1,000
Measured a.