Document
SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes
FM201A THRU
FM207A
FEATURES
* Glass passivated device * Ideal for surface mounted applications * Low leakage current * Metallurgically bonded construction * Mounting position: Any * P/N suffix V means AEC-Q101 qualified * P/N suffix V means Halogen-free
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
DO-214AC
0.067 (1.70 ) 0.051 (1.29 )
0.180 ( 4.57 ) 0.160 ( 4.06 )
0.110 ( 2.79 ) 0.086 ( 2.18 )
0.091 ( 2.31 ) 0.067 ( 1.70 )
0.059 ( 1.50 ) 0.035 ( 0.89 )
0.012 ( 0.305 ) 0.006 ( 0.152 )
0.209 ( 5.31 ) 0.185 ( 4.70 )
0.008 ( 0.203 ) 0.004 ( 0.102 )
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25oC unless otherwise noted)
RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time
Typical Thermaesistance
Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range
SYMBOL VRRM VRMS VDC
FM201A FM202AFM203A FM204AFM205A FM206AFM207A UNITS
50
100 200 400 600 800 1000 Volts
35
70
140 280 420 560 700
Volts
50
100 200 400 600 800 1000 Volts
IO
2.0
Amps
IFSM
I2T (Note 2)RQJL (Note 3)RQJA
CJ TJ,TSTG
70 20.33 20 50 30 -65 to + 175
Amps
A2S 0C/ W 0C/ W
pF 0C
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS
SYMBOL FM201A FM202AFM203A FM204AFM205A FM206AFM207A UNITS
Maximum Instantaneous Forward Voltage at 2.0A DC
VF
Maximum Average Reverse Current
@TA = 25oC
at Rated DC Blocking Voltage
@TA = 100oC
IR
1.0
Volts
1.0
uAmps
800
uAmps
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. Thermal resistance junction to terminal, 5X5mm2 copper pads to each terminal. 3. Thermal resistance junction to ambient, 5X5mm2 copper pads to each terminal.
2017-12 REV:A
AVERAGE FORWARD CURRENT, (A)
RATING AND CHARACTERISTIC CURVES( FM201A THRU FM207A)
FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE
2.5
2.0
1.5
1.0
Single Phase
.5 Half Wave 60Hz
Resistive or Inductive Load
0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( )
FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
100
80
8.3ms Single Half Sine-Wave
(JEDED Method)
60
40
20
0 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz
INSTANTANEOUS REVERSE CURRENT, (uA)
INSTANTANEOUS FORWARD CURRENT, (A)
20 10
4 2 1.0
.4 .2 .1
.04 .02 .01
.6
FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
TJ = 25 Pulse Width=300uS
1% Duty Cycle
.8
1.0
1.2
1.4 1.5
INSTANTANEOUS FORWARD VOLTAGE, (V)
1000
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
100
TJ = 150
1
TJ = 25
0.1
0
20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
PEAK FORWARD SURGE CURRENT, (A)
JUNCTION CAPACITANCE, (pF)
FIG. 5 - TYPICAL JUNCTION CAPACITANCE 200 100 60 40 20 10
TJ = 25
6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100
REVERSE VOLTAGE, ( V )
RECTRON
Mounting Pad Layout
0.106 MAX. (2.69 MAX.)
0.050 MIN. (1.27 MIN.)
0.220 (5.58) REF
0.083MIN. ( 2.10 MIN.)
Dimensions in inches and (millimeters)
Marking Description
Cathode Band
2BX VXXX
Year – code (Y: Last digit of year&
A: 2010, B: 2011……)
Part No. Voltage-code
1-------50V 5-------600V 2-------100V 6-------800V 3-------200V 7-------1000V 4-------400V
Week – code (WW: 01~52)
PACKAGING OF DIODE AND BRIDGE RECTIFIERS
REEL PACK
PACKAGE
PACKING EA PER CODE REEL
EA PER INNER BOX
COMPONENT SPACE (mm)
TAPE SPACE (mm)
REEL DIA (mm)
CARTON SIZE (mm)
EA PER CARTON
GROSS WEIGHT(Kg)
SMA
-T
1,500 6,000
---
---
178 390*205*310 48,000
8.40
SMA
-W
5,000 10,000
---
---
330 360*355*360 80,000 14.20
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly ca.