OPERATIONAL AMPLIFIER. TLE2082 Datasheet

TLE2082 AMPLIFIER. Datasheet pdf. Equivalent

Part TLE2082
Description EXCALIBUR HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIER
Feature D Direct Upgrades to TL05x, TL07x, and TL08x BiFET Operational Amplifiers D Greater Than 2× Bandwidt.
Manufacture etcTI
Datasheet
Download TLE2082 Datasheet



TLE2082
D Direct Upgrades to TL05x, TL07x, and
TL08x BiFET Operational Amplifiers
D Greater Than 2× Bandwidth (10 MHz) and
3× Slew Rate (45 V/µs) Than TL08x
TLE208x, TLE208xA, TLE208xY
EXCALIBUR HIGH-SPEED JFET-INPUT
OPERATIONAL AMPLIFIERS
SLOS182B – FEBRUARY 1997 – REVISED JUNE 2001
D On-Chip Offset Voltage Trimming for
Improved DC Performance
D Wider Supply Rails Increase Dynamic
Signal Range to ±19 V
description
The TLE208x series of JFET-input operational amplifiers more than double the bandwidth and triple the slew
rate of the TL07x and TL08x families of BiFET operational amplifiers. The TLE208x also have wider
supply-voltage rails, increasing the dynamic-signal range for BiFET circuits to ±19 V. On-chip zener trimming
of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE208x are
pin-compatible with lower performance BiFET operational amplifiers for ease in improving performance in
existing designs.
BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without
sacrificing the output drive associated with bipolar amplifiers. This makes these amplifiers better suited for
interfacing with high-impedance sensors or very low level ac signals. They also feature inherently better ac
response than bipolar or CMOS devices having comparable power consumption.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to
observe common-mode input-voltage limits and output voltage swing when operating from a single supply. DC
biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply.
Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from
single supplies.
The TLE208x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems,
Texas Instruments LinCMOSfamilies of operational amplifiers (TLC- and TLV-prefix) are recommended.
When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth
requirements and output loading.
For BiFET circuits requiring low noise and/or tighter dc precision, the TLE207x offer the same ac response as
the TLE208x with more stringent dc and noise specifications.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinCMOS is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2001, Texas Instruments Incorporated
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1



TLE2082
TLE208x, TLE208xA, TLE208xY
EXCALIBUR HIGH-SPEED JFET-INPUT
OPERATIONAL AMPLIFIERS
SLOS182B FEBRUARY 1997 REVISED JUNE 2001
TLE2081 AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
SMALL
OUTLINE
CHIP
CARRIER
CERAMIC
DIP
PLASTIC
DIP
(D)
(FK)
(JG)
(P)
0°C to 70°C
3 mV
6 mV
TLE2081ACD
TLE2081CD
TLE2081ACP
TLE2081CP
40°C to 85°C
3 mV
6 mV
TLE2081AID
TLE2081ID
TLE2081AIP
TLE2081IP
55°C to 125°C
3 mV
6 mV
TLE2081AMFK TLE2081AMJG
TLE2081MFK TLE2081MJG
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2081ACDR).
Chip forms are tested at TA = 25°C only.
CHIP
FORM
(Y)
TLE2081Y
TLE2082 AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
SMALL
OUTLINE
CHIP
CARRIER
CERAMIC
DIP
PLASTIC
DIP
(D)
(FK)
(JG)
(P)
0°C to 70°C
4 mV
7 mV
TLE2082ACD
TLE2082CD
TLE2082ACP
TLE2082CP
40°C to 85°C
4 mV
7 mV
TLE2082AID
TLE2082ID
TLE2082AIP
TLE2082IP
55°C to 125°C
4 mV
7 mV
TLE2082AMD TLE2082AMFK TLE2082AMJG TLE2082AMP
TLE2082MD
TLE2082MFK TLE2082MJG TLE2082MP
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2082ACDR).
Chip forms are tested at TA = 25°C only.
CHIP FORM
(Y)
TLE2082Y
TLE2084 AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
SMALL
OUTLINE
CHIP
CARRIER
CERAMIC
DIP
PLASTIC
DIP
(DW)
(FK)
(J)
(N)
0°C to 70°C
4 mV
7 mV
TLE2084ACDW
TLE2084CDW
TLE2084ACN
TLE2084CN
55°C to 125°C
4 mV
7 mV
TLE2084AMFK TLE2084AMJ
TLE2084MFK TLE2084MJ
The DW packages are available taped and reeled. Add R suffix to device type (e.g., TLE2084ACDWR).
Chip forms are tested at TA = 25°C only.
CHIP
FORM
(Y)
TLE2084Y
2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)