GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR
ATTENUATORS - ANALOG - SMT
v06.0514
Typical Applications
The HMC346LC3B is ideal for: • Test Instrumentation • Fiber Op...
Description
ATTENUATORS - ANALOG - SMT
v06.0514
Typical Applications
The HMC346LC3B is ideal for: Test Instrumentation Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar, & ECM
Functional Diagram
HMC346LC3B
GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, DC - 18 GHz
Features
Wide Bandwidth: DC - 18 GHz Low Phase Shift vs. Attenuation 30 dB Attenuation Range Simplified Voltage Control RoHS Compliant 3 x 3 mm SMT Package
General Description
The HMC346LC3B is an absorptive Voltage Variable Attenuator (VVA) in a leadless “Pb free” RoHS compliant SMT mount ceramic package operating from DC - 18 GHz. It features an on-chip reference attenuator for use with an external op-amp to provide simple single voltage attenuation control, 0 to -3V. The device is ideal in designs where an analog DC control signal must control RF signal levels over a 30 dB amplitude range. The HMC346LC3B allows the use of surface mount manufacturing techniques.
Electrical Specifications, TA = +25° C, 50 Ohm system
Parameter
Min
Typical
Max
Insertion Loss Attenuation Range
DC - 10 GHz DC - 14 GHz DC - 18 GHz
1.5
2.0
2.2
2.7
2.8
3.5
DC - 12 GHz
26
30
DC - 18 GHz
22
26
Return Loss
DC - 18 GHz
10
Input Power for 0.25 dB Compression (0.5 - 18 GHz)
Min. Atten:
+8
Atten. >2 dB:
-4
Input Third Order Intercept (0.5 - 18 GHz) (Two-tone Input Power = -8 dBm Each Tone)
Min. Atten:
+25
Atten. >2 dB:
+10
Switching Characteristics
tRISE, tFALL (10/90% RF):
2
tON, tOFF (50% ...
Similar Datasheet