GaAs HBT MMIC
FREQUENCY DIVIDERS - CHIP
v07.0109
1 Typical Applications Prescaler for DC to X Band PLL Applications: • Satellite Comm...
Description
FREQUENCY DIVIDERS - CHIP
v07.0109
1 Typical Applications Prescaler for DC to X Band PLL Applications: Satellite Communication Systems Fiber Optic Point-to-Point and Point-to-Multi-Point Radios VSAT Functional Diagram
HMC361
GaAs HBT MMIC DIVIDE-BY-2, DC - 11 GHz
Features
Ultra Low SSB Phase Noise: -148 dBc/Hz Wide Bandwidth Output Power: 3 dBm Single DC Supply: +5V Small Size: 1.14 x 0.69 x 0.1 mm
General Description
The HMC361 is a low noise Divide-by-2 Static Divider with InGaP GaAs HBT technology that has a small size of 1.14 x 0.69 mm. This device operates from DC (with a square wave input) to 11 GHz input frequency with a single +5V DC supply. The low additive SSB phase noise of -148 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance.
1-2
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc = 5V
Parameter Maximum Input Frequency Minimum Input Frequency
Conditions Sine Wave Input. [1]
Min.
Typ.
11
12
0.2
Input Power Range
Fin = 1 to 9 GHz
-15
>-20
Output Power [2]
Fin = 9 to 11 GHz Fin = 6 GHz Fin = 9 GHz
-10
>-15
0
3
-5
Fin = 11 GHz
-8
Reverse Leakage
Both RF Outputs Terminated
45
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz
-148
Output Transition Time
Pin = 0 dBm, Fout = 882 MHz
100
Supply Current (Icc) [2]
83
[1] Divider will operate down to DC for square-wave input signal. [2] When operated in high power mode (pin 8 connected to ground).
Max.
0.5 +10 +2
Units GHz GHz dBm dBm ...
Similar Datasheet