SMT GaAs HBT MMIC
FREQUENCY DIVIDERS & DETECTORS - SMT
v08.1119
Typical Applications
4
Prescaler for DC to X Band PLL Applications:
•...
Description
FREQUENCY DIVIDERS & DETECTORS - SMT
v08.1119
Typical Applications
4
Prescaler for DC to X Band PLL Applications:
Satellite Communication Systems
Fiber Optic
Point-to-Point and Point-to-Multi-Point Radios
VSAT
Functional Diagram
HMC361S8G/361S8GE
SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 10 GHz
Features
Ultra Low SSB Phase Noise: -148 dBc/Hz Wide Bandwidth Output Power: 3 dBm Single DC Supply: +5V S8G SMT Package
General Description
The HMC361S8G & HMC361S8GE are low noise Divide-by-2 Static Dividers with InGaP GaAs HBT technology in 8 lead surface mount plastic packages. This device operates from DC (with a square wave input) to 10 GHz input frequency with a single +5V DC supply. The low additive SSB phase noise of -148 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter Maximum Input Frequency Minimum Input Frequency Input Power Range
Conditions
Sine Wave Input. [1] Fin = 1 to 8 GHz
Min.
Typ.
10
11
0.2
-15
Output Power
Fin = 8 to 10 GHz Fin = 6 GHz
-10
0
3
Reverse Leakage
Fin = 10 GHz Both RF Outputs Terminated
-6 45
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz
-148
Output Transition Time
Pin = 0 dBm, Fout = 882 MHz
100
Supply Current (Icc)
83
1. Divider will operate down to DC for square-wave input signal.
Max.
0.5 +10 +2
Units GHz GHz dBm dBm dBm dBm dB dBc/Hz ps mA
4-1
InFfoormraptiornicfeur,nidsheeldivbeyryA,naalong...
Similar Datasheet