CELLULAR HIGH IP3 RFIC DOWNCONVERTER
HMC377QS16G / 377QS16GE
v02.0207
CELLULAR HIGH IP3 RFIC DOWNCONVERTER, 0.8 - 1.0 GHz
Typical Applications
Features
...
Description
HMC377QS16G / 377QS16GE
v02.0207
CELLULAR HIGH IP3 RFIC DOWNCONVERTER, 0.8 - 1.0 GHz
Typical Applications
Features
The HMC377QS16G / HMC377QS16GE is ideal for:
+15 dBm Input IP3, +29 dBm Output IP3
GSM & CDMA Infrastructure
Low LO Drive: -5 dBm LO
8
GPRS & EDGE Infrastructure
Conversion Gain: 14 dB
Wireless Data/CDPD
Noise Figure: 11 dB
MIXERS - DOWNCONVERTERS - SMT
LETE Functional Diagram
Positive Supply: +5V @ 135 mA
General Description
The HMC377QS16G & HMC377QS16GE are linear downconverter receiver ICs suitable for cellular infrastructure applications from 0.8 - 1.0 GHz. An integrated mixer coupled with a high dynamic range IF amplifier achieves an input intercept point (IP3) of +15 dBm, and an input P1dB of +3.5 dBm. The converter provides a gain of 13.5 dB and only 11 dB typical single side band noise figure. The IC operates from a positive +5V rail consuming 135 mA of current while requiring only -5 dBm LO drive. The design requires no external baluns. The mixer supports IF frequencies between 50 MHz and 250 MHz.
SO Electrical Specifications, TA = +25° C, LO = -5 dBm, IF = 70 MHz, Vdd = 5V
B Frequency Range, RF
Frequency Range, LO
O Frequency Range, IF *
Parameter
Min.
Typ.
Max.
0.8 - 1.0
0.55 - 1.15
50 - 250
Units GHz GHz MHz
Conversion Gain
11
14
dB
Noise Figure (SSB)
11
dB
LO to RF Isolation
23
28
dB
LO to IF Isolation
63
70 - 75
dB
RF to IF Isolation
83
90 - 95
dB
IP3 (Input)
12
15
dBm
1 dB Compression (Input)...
Similar Datasheet