SMT SiGe MMIC
HMC426MS8 / 426MS8E
v00.0903
SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz
6 Typical Applications
Features
FREQUENCY DIVIDE...
Description
HMC426MS8 / 426MS8E
v00.0903
SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz
6 Typical Applications
Features
FREQUENCY DIVIDERS & DETECTORS - SMT
Prescaler for DC to 4.0 GHz PLL Applications:
Ultra Low SSB Phase Noise: -146 dBc/Hz
DBS/CATV Tuners
Wide Input Power Range: -15 to +10 dBm
802.11x & HiperLAN WLAN
Output Power: +3.5 dBm
Fixed Wireless & WLL
Single DC Supply: +3V @ 13 mA
Microwave & VSAT Radios Cellular & 3G
LETE Functional Diagram
MS8 SMT Package
General Description
The HMC426MS8 & HMC426MS8E are low noise Divide-by-4 Static Dividers utilizing SiGe technology in 8 lead surface mount plastic packages. This device operates from DC (with a square wave input) to 4.0 GHz input frequency while operating from a single +3V supply at only 13 mA. The low additive SSB phase noise of -146 dBc/Hz at 100 kHz offset helps the user maintain excellent system noise performance.
BSO Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 3V
Parameter Maximum Input Frequency
O Minimum Input Frequency
Conditions Sine Wave Input. [1]
Min.
Typ.
Max.
4.0
4.5
0.2
0.5
Units GHz GHz
Input Power Range
Fin = 0.5 to 2 GHz
-15
-20
+5
dBm
Fin = 2 to 4 GHz
-15
-20
+10
dBm
Output Power
Fin = 1 GHz
+0.5
+3.5
dBm
Fin = 4 GHz
-3
0
dBm
Reverse Leakage
25
dB
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 3 GHz
-146
dBc/Hz
Output Transition Time
Pin = 0 dBm, Fout = 500 MHz
400
ps
Supply Current (Icc)
13
mA
1. Divider will operate down ...
Similar Datasheet