SMT GaAs HBT MMIC
FREQUENCY DIVIDERS & DETECTORS - SMT
v04.0410
Typical Applications
4
Prescaler for DC to C Band PLL Applications:
•...
Description
FREQUENCY DIVIDERS & DETECTORS - SMT
v04.0410
Typical Applications
4
Prescaler for DC to C Band PLL Applications:
UNII, Point-to-Point & VSAT Radios
802.11a & HiperLAN WLAN
Fiber Optic
Cellular / 3G Infrastructure
Functional Diagram
HMC433 / 433E
SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 8 GHz
Features
Ultra Low SSB Phase Noise: -150 dBc/Hz Single-Ended I/O’s Output Power: -2 to -3.5 dBm Single DC Supply: +3V @ 53 mA 9 mm2 Ultra Small Package: SOT26
General Description
The HMC433(E) is a low noise Divide-by-4 Static Divider utilizing InGaP GaAs HBT technology in ultra small surface mount SOT26 plastic packages. This device operates from DC (with a square wave input) to 8 GHz input frequency with a single +3V DC supply. Single-ended inputs and outputs reduce component count and cost. The low additive SSB phase noise of -150 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= +3V
Parameter
Conditions
Maximum Input Frequency
Minimum Input Frequency
Sine Wave Input. [1]
Input Power Range
Fin= 1 to 6 GHz Fin= 6 to 8 GHz
Output Power
Fin= 4 GHz Fin= 8 GHz
Reverse Leakage
RF Output Terminated, Fin= 4 GHz, Pin= 0 dBm
SSB Phase Noise (100 kHz offset)
Pin= 0 dBm, Fin= 4 GHz
Output Transition Time
Pin= 0 dBm, Fout= 882 MHz
Supply Current (Icc)
Vcc= +3.0V
1. Divider will operate down to DC for square-wave input signal.
Min.
Typ.
Max.
Units
8
8.5
GHz
0.2
GHz
-12...
Similar Datasheet