v01.0805
Typical Applications
Low noise MMIC VCO w/Buffer Amplifier for: • VSAT Radio • Point to Point/Multipoint Radio ...
v01.0805
Typical Applications
Low noise MMIC VCO w/Buffer Amplifier for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use
Functional Diagram
11
HMC506LP4 / 506LP4E
MMIC VCO w/ BUFFER AMPLIFIER, 7.8 - 8.7 GHz
Features
Pout: +14 dBm Phase Noise: -103 dBc/Hz @100 KHz No External Resonator Needed Single Supply: +3V @ 77 mA QFN Leadless SMT Package, 16 mm2
General Description
The HMC506LP4 & HMC506LP4E are GaAs InGaP Heterojunction Bipolar
Transistor (HBT) MMIC VCOs with integrated resonators, negative resistance devices, varactor diodes, and buffer amplifiers. Covering 7.8 to 8.7 GHz, the VCO’s phase noise performance is excellent over temperature, shock and vibration due to the oscillator’s monolithic structure. Power output is +14 dBm typical from a single supply of +3.0V @ 77 mA. The voltage controlled oscillator is packaged in a leadless QFN 4 x 4 mm surface mount package.
VCOS & PLOs - SMT
Electrical Specifications, TA = +25° C, Vcc = +3V
Parameter
Min.
Frequency Range
Power Output
11.0
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RF Output
Tune Voltage (Vtune)
1
Supply Current (Icc) (Vcc = +3.0V)
Tune Port Leakage Current
Output Return Loss
Harmonics 2nd 3rd
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= +5V
Frequency Drift Rate
Typ. 7.8 - 8.7
14.0 -103
77
7
-16 -28 28 78 0.85
Max.
11 10
Units GHz dBm dBc/Hz
V mA μA dB
dBc dBc MHz pp MHz/V MHz/°C
11 - 102
Information furnisheFd obyr ApnrailocgeD,...