2:1 SELECTOR
HIGH SPEED LOGIC - SMT
HMC748LC3C
v05.0514
14 Gbps, 2:1 SELECTOR w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Typi...
Description
HIGH SPEED LOGIC - SMT
HMC748LC3C
v05.0514
14 Gbps, 2:1 SELECTOR w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Typical Applications
The HMC748LC3C is ideal for: 2:1 Multiplexer up to 14 Gbps RF ATE Applications Broadband Test & Measurement Serial Data Transmission up to 14 Gbps Redundant Path Switching Built-in Test
Features
Supports High Data Rates: up to 14 Gbps Single-ended inputs Differential & Single-Ended Outputs Fast Rise and Fall Times: 22 / 22 ps Low Power Consumption: 250 mW typ. Programmable Differential
Output Voltage Swing: 600 - 1200 mV Propagation Delay: 125 ps Single Supply: +3.3 V 16 Lead Ceramic 3x3 mm SMT Package: 9 mm2
Functional Diagram
General Description
The HMC748LC3C is a 2:1 Selector designed to support data transmission rates of up to 14 Gbps, and selector port operation of up to 14 GHz. The selector routes one of the two single-ended inputs to the differential output upon assertion of the proper select port. The HMC748LC3C also features an output level control pin, VR, that allows for loss compensation or for signal level optimization.
All select differential inputs to the HMC748LC3C are CML and terminated on-chip with 50 ohms to the positive supply, Vcc, and may be AC or DC coupled. The single-ended inputs to the HMC748LC3C are CML terminated on-chip with 50 ohms to the positive supply, GND, and may be DC coupled. The differential CML outputs are source terminated to 50 ohms and may also be AC or DC coupled. Outputs can be conn...
Similar Datasheet