2:1 MUX
HMC954LC4B
v01.0614
32 Gbps, 2:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Typical Applications
The HMC954LC4B is ideal f...
Description
HMC954LC4B
v01.0614
32 Gbps, 2:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Typical Applications
The HMC954LC4B is ideal for: SONET OC-192 Broadband Test & Measurement Equipment FPGA Interfacing Circuitry 16 G and 32 G Fiber Channel 100 Gbit Ethernet
Features
Supports Data Rates up to 32 Gbps 479 mW Power Consumption -3.3 V or +3.3 V Operation is Available Supports Single-Ended and Differential Operation 24 Lead Ceramic 4x4 mm SMT Package: 16 mm2
MUX & DEMUX - SMT
Functional Diagram
General Description
The HMC954LC4B is a 2 to 1 Multiplexer designed for 32 Gbps data serialization. The mux latches the two differential inputs on a rising edge of the input clock. The device uses both rising and falling edges of the halfrate clock to serialize the data. The HMC954LC4B also features an output level control pin, VR, which allows for loss compensation or for signal-level optimization.
All differential inputs to the HMC954LC4B are CML and terminated on-chip with 50 Ohms to the positive supply, GND, and may be AC or DC coupled. The differential CML outputs are source terminated to 50 Ohms and may also be AC or DC coupled. Outputs can be connected directly to a 50 Ohm ground-terminated system or drive devices with CML logic input. The HMC954LC4B operates from a single -3.3 V supply and is available in a ceramic ROHS-compliant 4x4 mm SMT package.
Electrical Specifications, TA = +25 ÂșC, Vee = -3.3 V, VR = 0 V
Parameter
Conditions
Min.
Power Supply Voltage (Vee)
-3.6
Po...
Similar Datasheet
- HMC954LC4B 2:1 MUX - Analog Devices