Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
Reference Design
LP3981
SNVS1...
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
Reference Design
LP3981
SNVS159H – OCTOBER 2001 – REVISED JULY 2015
LP3981 Micropower, 300-mA Ultra-Low-Dropout CMOS Voltage
Regulator
1 Features
1 2.5-V to 6-V Input Range 300-mA Output Current 60-dB PSRR at 1 kHz ≤ 1-μA Quiescent Current When Shut Down Fast Turnon Time: 120 μs (typical) with CBYPASS =
0.01 µF 132-mV Typical Dropout with 300-mA Load 35-μVrms Output Noise Over 10 Hz to 100 kHz Logic Controlled Enable Stable With Ceramic and High-Quality Tantalum
Capacitors Thermal Shutdown and Short-Circuit Current Limit Low Thermal Resistance in WSON-6 Package
Gives Excellent Power Capability
2 Applications
CDMA Cellular Handsets Wideband CDMA Cellular Handsets GSM Cellular Handsets Portable Information Appliances
3 Description
Performance of the LP3981 device is optimized for battery-powered systems to deliver ultra-low-noise, extremely low dropout voltage, and low quiescent current.
Regulator ground current increases only slightly in dropout, further prolonging the battery life.
Power supply rejection is better than 60 dB at low frequencies. This high power supply rejection is maintained down to lower input voltage levels common to battery-operated circuits.
The device is ideal for mobile phone and similar battery-powered wireless applications. It provides up to 300 mA, from a 2.5-V to 6-V input, consuming less than 1 µA in disable mode.
The LP3981 is a...