RS-485 Transceiver
SN65HVD1792-EP
www.ti.com
SLLSEG8A – AUGUST 2013 – REVISED AUGUST 2013
Fault-Protected RS-485 Transceivers With Exten...
Description
SN65HVD1792-EP
www.ti.com
SLLSEG8A – AUGUST 2013 – REVISED AUGUST 2013
Fault-Protected RS-485 Transceivers With Extended Common-Mode Range
Check for Samples: SN65HVD1792-EP
FEATURES
1
Bus-Pin Fault Protection to > ±70 V Common-Mode Voltage Range (–20 V to 25 V)
More Than Doubles TIA/EIA 485 Requirement Bus I/O Protection
– ±16 kV JEDEC HBM Protection Reduced Unit Load for Up to 256 Nodes Failsafe Receiver for Open-Circuit, Short-
Circuit and Idle-Bus Conditions Low Power Consumption
– Low Standby Supply Current, 1 μA Typ – ICC 5 mA Quiescent During Operation Power-Up, Power-Down Glitch-Free Operation
APPLICATIONS
Designed for RS-485 and RS-422 Networks
SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
Controlled Baseline One Assembly and Test Site One Fabrication Site Extended Product Life Cycle Extended Product-Change Notification Product Traceability
DESCRIPTION
The SN65HVD1792 is designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. It is also robust to ESD events, with high levels of protection to human-body model specifications.
The SN65HVD1792 combines a differential driver and a differential receiver, which operate from a single power supply. The SN65HVD1792 is characterized from –40°C to 105°C.
VFAULT up to 70 V
M0092-01
TA –40°C to 105°C
PACKAGE (2) SOIC - D
ORDERING INFORMATION(1)
ORDERABLE PART NUMBER
TOP-SIDE MARKI...
Similar Datasheet