high linearity Si variable gain amplifier
+94)1
BGA7351
50 MHz to 500 MHz high linearity Si variable gain amplifier; 28 dB gain range
Rev. 3 — 11 June 2014
...
Description
+94)1
BGA7351
50 MHz to 500 MHz high linearity Si variable gain amplifier; 28 dB gain range
Rev. 3 — 11 June 2014
Product data sheet
1. Product profile
1.1 General description
The BGA7351 MMIC is a dual independently digitally controlled IF Variable Gain Amplifier (VGA) operating from 50 MHz to 500 MHz. Each IF VGA amplifies with a gain range of 28 dB and at its maximum gain setting delivers 16.5 dBm output power at 1 dB gain compression and a superior linear performance.
The BGA7351 Dual IF VGA is optimized for a differential gain error of less than 0.1 dB for accurate gain control and has a total integrated gain error of less than 0.3 dB. Moreover it meets the demanding phase error requirements for GSM. BGA7351 has less than 3.0 phase error over the full gain range of 28 dB.
The gain controls of each amplifier are separate digital gain-control word, which is provided externally through two sets of 5 bits.
The BGA7351 is housed in a 32 pins 5 mm 5 mm leadless HVQFN32 package.
1.2 Features and benefits
Dual independent digitally controlled 28 dB gain range VGAs, with 5-bit control interface
50 MHz to 500 MHz frequency operating range Gain step size: 1 dB 0.1 dB 22 dB power gain Fast gain stage switching capability 16.5 dBm output power at 1 dB gain compression 46 dBm third order intercept point Constant third order intercept point over output power 85 dBc second harmonic level Excellent noise figure of 6 dB 5 V single supply operation with...
Similar Datasheet