LIN transceiver. UJA1018 Datasheet

UJA1018 transceiver. Datasheet pdf. Equivalent

Part UJA1018
Description LIN transceiver
Feature UJA1018 LIN system basis chip with LED drivers Rev. 1 — 10 July 2012 Product data sheet 1. General.
Manufacture NXP
Download UJA1018 Datasheet

LIN system basis chip with LED drivers
Rev. 1 — 10 July 2012
Product data sheet
1. General description
The UJA1018 is a LIN 2.0/2.1/2.2/SAE J2602 transceiver with an integrated low-drop
voltage regulator. The voltage regulator can deliver up to 70 mA at 5.0 V. The UJA1018
facilitates the development of compact nodes in LIN bus systems. In addition, the
UJA1018 supports LIN node address assignment in daisy chain networks via a LIN bus
switch. To support robust designs, the UJA1018 offers strong ElectroStatic Discharge
(ESD) performance and can withstand high voltages on the LIN bus. In order to minimize
current consumption, the UJA1018 supports a Sleep mode in which the LIN transceiver
and the voltage regulator are powered down while still having wake-up capability via the
LIN bus.
Three high-side switches are integrated into the UJA1018. They are intended to support a
variety of applications, including LED control for ambient lighting.
The UJA1018 comes in a 3.5 mm 5.5 mm HVSON16 package to help minimize board
size. The exposed center pad in the HVSON16 package provides enhanced thermal
2. Features and benefits
2.1 General
LIN 2.0/2.1/2.2 compliant
SAE J2602 compliant
Downward compatible with LIN 1.3
Internal LIN slave termination resistor
Slave Node Position Detection (SNPD) supported by LIN bus switch
Voltage regulator offering 5 V, 70 mA capability
2 % voltage regulator accuracy over specified temperature and supply ranges
Voltage regulator output undervoltage detection with reset output
Voltage regulator short-circuit proof to ground
Voltage regulator stable with ceramic, tantalum and aluminum electrolyte capacitors
3 high-side switches delivering up to 30 mA (e.g. to provide complete control over
color blending and brightness in LEDs)
Robust ESD performance; 8 kV according to IEC61000-4-2 for pins LIN and BAT
Pins LIN and BAT protected against transients in the automotive environment
(ISO 7637)
Very low LIN bus leakage current of <2 A when battery not connected
LIN pin short-circuit proof to battery and ground

NXP Semiconductors
LIN system basis chip with LED drivers
Transmit data (TXD) dominant time-out function
Thermally protected
Very low ElectroMagnetic Emissions (EME)
High ElectroMagnetic Immunity (EMI)
Typical Standby mode current of 47 A
Typical Sleep mode current of 14 A
LIN bus wake-up function
K-line compatible
Leadless HVSON16 package with improved Automated Optical Inspection (AOI)
Dark green product (halogen free and Restriction of Hazardous Substances (RoHS)
3. Ordering information
Table 1. Ordering information
Type number Package
HVSON16 plastic thermal enhanced very thin small outline package; no leads;
16 terminals; body 3.5 5.5 0.85 mm
4. Marking
Table 2. Marking codes
Type number
Marking code
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 10 July 2012
© NXP B.V. 2012. All rights reserved.
2 of 27

@ 2014 :: :: Semiconductors datasheet search & download site (Privacy Policy & Contact)