Low-ohmic single-pole single-throw analog switch
NX3L1G66-Q100
Low-ohmic single-pole single-throw analog switch
Rev. 1 — 28 October 2013
Product data sheet
1. Genera...
Description
NX3L1G66-Q100
Low-ohmic single-pole single-throw analog switch
Rev. 1 — 28 October 2013
Product data sheet
1. General description
The NX3L1G66-Q100 is a low-ohmic single-pole single-throw analog switch. It has two input/output terminals (Y and Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off.
Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times. The NX3L1G66-Q100 allows signals with amplitude up to VCC to be transmitted from Y to Z; or from Z to Y. Its low ON resistance (0.5 ) and flatness (0.13 ) ensures minimal attenuation and distortion of transmitted signals.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +85 C and from 40 C to +125 C
Wide supply voltage range from 1.4 V to 4.3 V Very low ON resistance (peak):
1.6 (typical) at VCC = 1.4 V 1.0 (typical) at VCC = 1.65 V 0.55 (typical) at VCC = 2.3 V 0.50 (typical) at VCC = 2.7 V 0.50 (typical) at VCC = 4.3 V High noise immunity ESD protection: MIL-STD-883, method 3015 Class 3A exceeds 7500 V HBM JESD22-A114F Class 3A exceeds 7500 V MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ) CDM AEC-Q100-011 revision B exceeds 1000 V IEC61000-4-2 contact dischar...
Similar Datasheet