SMD LED. APDA1806CGCK Datasheet

APDA1806CGCK LED. Datasheet pdf. Equivalent

Part APDA1806CGCK
Description SMD LED
Feature APDA1806CGCK 1.8 x 0.6 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS The Green source color devices .
Manufacture Kingbright
Datasheet
Download APDA1806CGCK Datasheet




APDA1806CGCK
APDA1806CGCK
1.8 x 0.6 mm Right Angle SMD Chip LED Lamp
DESCRIPTIONS
The Green source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
Electrostatic discharge and power surge could damage
the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
1.8 x 1.5 x 0.6 mm right angle SMD LED, 0.6 mm
thickness
Low power consumption
Ideal for backlight and indicator
Package: 4000 pcs / reel
Moisture sensitivity level: 3
Tinned pads for improved solderability
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
APDA1806CGCK
Green (AlGaInP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAP3634 / 1203015731 Rev No: V.1B Date: 12/20/2017
Iv (mcd) @ 20mA [2]
Min.
Typ.
120
400
Viewing Angle [1]
2θ1/2
25°
Page 1 / 4



APDA1806CGCK
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 20mA
Dominant Wavelength IF = 20mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA
Capacitance
λpeak
λdom [1]
Δλ
C
Green
Green
Green
Green
Forward Voltage IF = 20mA
VF [2]
Green
Reverse Current (VR = 5V)
IR
Green
Temperature Coefficient of λpeak
IF = 20mA, -10°C T 85°C
TCλpeak
Green
Temperature Coefficient of λdom
IF = 20mA, -10°C T 85°C
TCλdom
Green
Temperature Coefficient of VF
IF = 20mA, -10°C T 85°C
TCV
Green
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
APDA1806CGCK
Value
Typ.
Max.
574
-
570
-
20
-
15
-
2.1
2.5
-
10
0.12
-
0.08
-
-1.9
-
Unit
nm
nm
nm
pF
V
uA
nm/°C
nm/°C
mV/°C
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Power Dissipation
PD
75
Reverse Voltage
VR
Junction Temperature
Tj
Operating Temperature
Top
5
115
-40 to +85
Storage Temperature
Tstg
-40 to +85
DC Forward Current
IF
30
Peak Forward Current
IFM [1]
150
Electrostatic Discharge Threshold (HBM)
-
3000
Thermal Resistance (Junction / Ambient)
Rth JA [2]
680
Thermal Resistance (Junction / Solder point)
Rth JS [2]
540
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size16 mm2 per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAP3634 / 1203015731 Rev No: V.1B Date: 12/20/2017
Unit
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
Page 2 / 4







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)