Bi-Color LED. APHB1608LVBDSEKJ3C Datasheet

APHB1608LVBDSEKJ3C LED. Datasheet pdf. Equivalent

Part APHB1608LVBDSEKJ3C
Description Bi-Color LED
Feature APHB1608LVBDSEKJ3C 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED DESCRIPTIONS The Blue source color .
Manufacture Kingbright
Datasheet
Download APHB1608LVBDSEKJ3C Datasheet




APHB1608LVBDSEKJ3C
APHB1608LVBDSEKJ3C
1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED
DESCRIPTIONS
The Blue source color devices are made with InGaN
Light Emitting Diode
The Hyper Red device is based on light emitting diode
chip made from AlGaInP
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
1.6 x 0.8 mm SMD LED, 0.5 mm thickness
Compatible with reflow soldering
Available in various color combination
Package: 2000 pcs / reel
Moisture sensitivity level: 3
Tinned pads for improved solderability
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
APHB1608LVBDSEKJ3C
Blue (InGaN)
Hyper Red (AlGaInP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO4523 / 1203015175 Rev No: V.2A Date: 07/03/2017
Iv (mcd) @ 2mA [2]
Min.
6
*6
Typ.
15
*15
50
100
*20
*40
Viewing Angle [1]
2θ1/2
130°
Page 1 / 4



APHB1608LVBDSEKJ3C
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Wavelength at Peak Emission IF = 2mA
Symbol
λpeak
Emitting Color
Blue
Hyper Red
Min.
-
Dominant Wavelength IF = 2mA
λdom [1]
Blue
Hyper Red
-
Spectral Bandwidth at 50% Φ REL MAX
IF = 2mA
Δλ
Blue
Hyper Red
-
Capacitance
C
Blue
Hyper Red
-
Forward Voltage IF = 2mA
VF [2]
Blue
2.2
Hyper Red
1.5
Reverse Current (VR = 5V)
IR
Blue
Hyper Red
-
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
APHB1608LVBDSEKJ3C
Value
Unit
Typ.
Max.
465
640
-
nm
470
625
-
nm
22
20
-
nm
100
27
-
pF
2.65
3.0
1.8
2.1
V
-
50
10
uA
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Blue
Value
Hyper Red
Power Dissipation
PD
120
84
Reverse Voltage
VR
5
5
Junction Temperature
TJ
115
115
Operating Temperature
Top
-40 To +85
Storage Temperature
Tstg
-40 To +85
DC Forward Current
IF
30
Peak Forward Current
IFM [1]
100
Electrostatic Discharge Threshold (HBM)
-
250
30
150
3000
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO4523 / 1203015175 Rev No: V.2A Date: 07/03/2017
Unit
mW
V
°C
°C
°C
mA
mA
V
Page 2 / 4







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)