AA5060PBS-Z

PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z SINGLE COLOR. z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. z AVAILABLE ON TAPE AND REEL. z IDEAL FOR BACKLIGHTING. z PACKAGE : 500PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 4. zRoHS COMPLIANT. Package Dimensions 5.0X6.0mm SURFACE MOUNT LED LAMP Part Number: AA5060PBS/Z BLUE Description The Blue source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4670 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/28/2007 DRAWN: D.M.LIU PAGE: 1 OF 6 ERP:1201003010 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premat...