STATE LAMP. AM2520EC09 Datasheet

AM2520EC09 LAMP. Datasheet pdf. Equivalent

Part AM2520EC09
Description SUBMINIATURE SOLID STATE LAMP
Feature Features z Subminiature package. z Z-bend lead. z Long life - solid state reliability. z Low package.
Manufacture Kingbright
Datasheet
Download AM2520EC09 Datasheet




AM2520EC09
Features
z Subminiature package.
z Z-bend lead.
z Long life - solid state reliability.
z Low package profile.
z Moisture sensitivity level : level 3.
z Package : 1000pcs / reel.
z RoHS compliant.
Package Dimensions
SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520EC09
High Efficiency Red
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1280
APPROVED: WYNEC
REV NO: V.11A
CHECKED: Allen Liu
DATE: MAR/18/2015
DRAWN: P.Cheng
PAGE: 1 OF 5
ERP: 1202000462



AM2520EC09
Selection Guide
Part No.
Dice
Lens Type
AM2520EC09
High Efficiency Red (GaAsP/GaP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min. Typ. 2θ1/2
50
100
20°
*20
*50
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
High Efficiency Red
627
nm
IF=20mA
λD [1]
Dominant Wavelength
High Efficiency Red
617
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
High Efficiency Red
45
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
2
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
10
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating Temperature
Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
High Efficiency Red
75
30
160
5
-40°C To +85°C
-40°C To +85°C
SPEC NO: DSAD1280
APPROVED: WYNEC
REV NO: V.11A
CHECKED: Allen Liu
DATE: MAR/18/2015
DRAWN: P.Cheng
Units
mW
mA
mA
V
PAGE: 2 OF 5
ERP: 1202000462







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)