SMD LED. AAA3528LSEEZGKQBKS Datasheet

AAA3528LSEEZGKQBKS LED. Datasheet pdf. Equivalent

Part AAA3528LSEEZGKQBKS
Description SMD LED
Feature AAA3528LSEEZGKQBKS 3.5 x 2.8 mm Surface Mount LED Lamp DESCRIPTIONS The Hyper Red source color devi.
Manufacture Kingbright
Datasheet
Download AAA3528LSEEZGKQBKS Datasheet




AAA3528LSEEZGKQBKS
AAA3528LSEEZGKQBKS
3.5 x 2.8 mm Surface Mount LED Lamp
DESCRIPTIONS
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode
The Blue source color devices are made with InGaN
Light Emitting Diode
Electrostatic discharge and power surge could
Damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
Suitable for all SMD assembly and solder process
Available on tape and reel
Package: 2000 pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
SELECTION GUIDE
Part Number
AAA3528LSEEZGKQBKS
Emitting Color
(Material)
Hyper Red
(AlGaInP)
Green (InGaN)
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Lens Type
Water Clear
Iv (mcd) @ 2mA [2]
Min.
Typ.
10
20
80
180
Viewing Angle [1]
2θ1/2
120°
Blue (InGaN)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO4456 / 1201008965 Rev No: V.5B Date: 04/08/2019
12
30
Page 1 / 5



AAA3528LSEEZGKQBKS
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 2mA
Dominant Wavelength IF = 2mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 2mA
Capacitance
Forward Voltage IF = 2mA
Reverse Current (VR = 5V)
Temperature Coefficient of λpeak
IF = 2mA, -10°C T 85°C
Temperature Coefficient of λdom
IF = 2mA, -10°C T 85°C
Temperature Coefficient of VF
IF = 2mA, -10°C T 85°C
λpeak
λdom [1]
Δλ
C
VF [2]
IR
TCλpeak
TCλdom
TCV
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
AAA3528LSEEZGKQBKS
Value
Typ.
Max.
630
515
-
460
621
525
-
465
20
35
-
25
25
45
-
100
1.8
2.1
2.65
3.1
2.65
3.1
10
-
50
50
0.13
0.05
-
0.04
0.06
0.03
-
0.03
-1.9
-2.9
-
-2.9
Unit
nm
nm
nm
pF
V
μA
nm/°C
nm/°C
mV/°C
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Hyper Red
Value
Green
Blue
Power Dissipation
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
DC Forward Current
Peak Forward Current
PD
125
123
120
VR
5
5
5
Tj
115
115
115
Top
-40 to +85
Tstg
-40 to +85
IF
50
30
30
IFM [1]
195
150
150
Electrostatic Discharge Threshold (HBM)
-
3000
450
250
Thermal Resistance (Junction / Ambient)
Rth JA [2]
340
320
350
Thermal Resistance (Junction / Solder point)
Rth JS [2]
190
190
240
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm2 per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO4456 / 1201008965 Rev No: V.5B Date: 04/08/2019
Unit
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
Page 2 / 5







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)