ROUND LED. WP9294SYC-J3 Datasheet

WP9294SYC-J3 LED. Datasheet pdf. Equivalent

Part WP9294SYC-J3
Description ROUND LED
Feature Features z High luminous emission. z Low power consumption. z General purpose leads. z Reliable and .
Manufacture Kingbright
Datasheet
Download WP9294SYC-J3 Datasheet




WP9294SYC-J3
Features
z High luminous emission.
z Low power consumption.
z General purpose leads.
z Reliable and rugged.
z Long life - solid state reliability.
z RoHS compliant.
Package Dimensions
5mm ROUND LED LAMP
Part Number: WP9294SYC/J3
Super Bright Yellow
Description
The Super Bright Yellow device is based on light emitting
diode chip made from AlGaInP.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAJ0593
APPROVED: WYNEC
REV NO: V.6B
CHECKED: Allen Liu
DATE: MAR/20/2015
DRAWN: L.Q.Xie
PAGE: 1 OF 6
ERP: 1101025072



WP9294SYC-J3
Selection Guide
Part No.
Dice
Lens Type
WP9294SYC/J3
Super Bright Yellow (AlGaInP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
400 700
Viewing
Angle [1]
2θ1/2
130°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Super Bright Yellow
590
nm
IF=20mA
λD [1]
Dominant Wavelength
Super Bright Yellow
590
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Super Bright Yellow
20
nm
IF=20mA
C
Capacitance
Super Bright Yellow
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Yellow
2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Yellow
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Super Bright Yellow
75
30
140
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
SPEC NO: DSAJ0593
APPROVED: WYNEC
REV NO: V.6B
CHECKED: Allen Liu
DATE: MAR/20/2015
DRAWN: L.Q.Xie
Units
mW
mA
mA
V
PAGE: 2 OF 6
ERP: 1101025072







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)