ROUND LED. WP9294SEC-J3 Datasheet

WP9294SEC-J3 LED. Datasheet pdf. Equivalent

Part WP9294SEC-J3
Description ROUND LED
Feature WP9294SEC/J3 5 mm Round LED Lamp DESCRIPTIONS z The Hyper Red device is based on light emitting diod.
Manufacture Kingbright
Datasheet
Download WP9294SEC-J3 Datasheet




WP9294SEC-J3
WP9294SEC/J3
5 mm Round LED Lamp
DESCRIPTIONS
z The Hyper Red device is based on light emitting
diode chip made from AlGaInP
z Electrostatic discharge and power surge could
damage the LEDs
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs
z All devices, equipments and machineries must be
electrically grounded
FEATURES
z High luminous emission
z Low power consumption
z General purpose leads
z Reliable and rugged
z Long life - solid state reliability
z RoHS compliant
APPLICATIONS
z Status indicator
z Illuminator
z Signage applications
z Decorative and entertainment lighting
z Commercial and residential architectural lighting
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
WP9294SEC/J3
Hyper Red
(AlGaInP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAJ0592 / 1101025073 Rev No: V.8A Date: 06/04/2018
Iv (mcd) @ 20mA [2]
Min.
Typ.
700
1000
*400
*700
Viewing Angle [1]
2θ1/2
130°
Page 1 / 5



WP9294SEC-J3
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 20mA
Dominant Wavelength IF = 20mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA
Capacitance
λpeak
λdom [1]
Δλ
C
Hyper Red
Hyper Red
Hyper Red
Hyper Red
Forward Voltage IF = 20mA
VF [2]
Hyper Red
Reverse Current (VR = 5V)
IR
Hyper Red
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
WP9294SEC/J3
Value
Unit
Typ.
Max.
640
-
nm
625
-
nm
25
-
nm
27
-
pF
2.2
2.8
V
-
10
uA
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Power Dissipation
PD
84
Reverse Voltage
VR
5
Junction Temperature
Tj
115
Operating Temperature
Top
-40 to +85
Storage Temperature
Tstg
-40 to +85
DC Forward Current
Peak Forward Current
Electrostatic Discharge Threshold (HBM)
Lead Solder Temperature [2]
IF
IFM [1]
-
30
150
3000
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAJ0592 / 1101025073 Rev No: V.8A Date: 06/04/2018
Unit
mW
V
°C
°C
°C
mA
mA
V
Page 2 / 5







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)