ADC08L060

ADC08L060 www.ti.com SNAS167G – MAY 2002 – REVISED MARCH 2013 ADC08L060 8-Bit, 10 MSPS to 60 MSPS, 0.65 mW/MSPS A/D Converter with Internal Sample-and-Hold Check for Samples: ADC08L060 FEATURES 1 2 Single-ended input Internal sample-and-hold function Low voltage (single +3V) operation Small package Power-down feature KEY SPECIFICATIONS Resolution 8 bits Conversion rate 60 MSPS DNL ±0.25 LSB (typ) INL +0.5/−0.2 LSB (typ) SNR (10.1 MHz) 48 dB (typ) ENOB (10.1 MHz) 7.6 bits (typ) THD (10.1 MHz) −57 dB (typ) Latency 5 Clock Cycles No missing codes Ensured Power Consumption – Operating 0.65 mW/MSPS (typ) – Power Down Mode 1.0 mW (typ) DESCRIPTION The ADC08L060 is a low-power, 8-bit, monolithic analog-to-digital converter with an on-chip track-andhold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 10 MSPS to 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 into a Power Down mode where it consumes about 1 mW. The unique architecture achieves 7.6 Effective Bits. The ADC08L060 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08L060s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 1.8V to 3V logic. The output ...