D/A Converter. DAC5574 Datasheet

DAC5574 Converter. Datasheet pdf. Equivalent

Part DAC5574
Description Quad 8-Bit D/A Converter
Feature DAC5574 www.ti.com SLAS407 – DECEMBER 2003 2QUAD, 8-BIT, LOW-POWER, VOLTAGE OUTPUT, I C INTERFACE .
Manufacture etcTI
Datasheet
Download DAC5574 Datasheet




DAC5574
DAC5574
www.ti.com
SLAS407 – DECEMBER 2003
2QUAD, 8-BIT, LOW-POWER, VOLTAGE OUTPUT,
I C INTERFACE DIGITAL-TO-ANALOG CONVERTER
FEATURES
Micropower Operation: 500 µA at 3 V VDD
Fast Update Rate: 188 kSPS
Per-channel Power-down Capability
Power-On Reset to Zero
2.7-V to 5.5-V Analog Power Supply
8-bit Monotonic
I2C™ Interface Up to 3.4 Mbps
Data Transmit Capability
On-Chip Output Buffer Amplifier, Rail-to-Rail
Operation
Double-Buffered Input Register
Address Support for up to Four DAC5574s
Synchronous Update Support for up to 16
Channels
Operation From –40°C to 105°C
Small 10 Lead MSOP Package
APPLICATIONS
Process Control
Data Acquisition Systems
Closed-Loop Servo Control
PC Peripherals
Portable Instrumentation
VDD
DESCRIPTION
The DAC5574 is a low-power, quad channel, 8-bit
buffered voltage output DAC. Its on-chip precision
output amplifier allows rail-to-rail output swing to be
achieved. The DAC5574 utilizes an I2C compatible
two wire serial interface supporting high-speed
interface mode with address support of up to four
DAC5574s for a total of 16 channels on the bus.
The DAC5574 uses VDD and GND to set the output
range of the DAC. The DAC5574 incorporates a
power-on-reset circuit that ensures that the DAC
output powers up at zero volts and remains there until
a valid write takes place to the device. The DAC5574
contains a per-channel power-down feature, ac-
cessed via the internal control register, reducing the
current consumption of the device to 200 nA at 5 V.
The low power consumption of this part in normal
operation makes it ideally suited to portable battery
operated equipment. The power consumption is less
than 3mW at VDD = 5 V reducing to 1 µW in
power-down mode.
TI offers a variety of data converters with I2C
interface. See DACx57x family of 16/12/10/8 bit,
single and quad channel DACs. Also see ADS7823
and ADS1100, 12-bit octal channel and 16-bit single
channel ADCs.
Data
Buffer A
DAC
DAC A
Register A
Data
Buffer D
DAC
Register D
DAC D
14
VOUTA
VOUTB
VOUTC
VOUTD
SCL
SDA
I2C
Block
Buffer
Control
8
Register
Control
A0 A1 GND
Power-Down
Control Logic
Resistor
Network
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
I2C is a trademark of Philips Corporation.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003, Texas Instruments Incorporated



DAC5574
DAC5574
SLAS407 – DECEMBER 2003
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated
circuits be handled with appropriate precautions. Failure to observe proper handling and installation
procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION(1)
PRODUCT PACKAGE
DAC5574
10-MSOP
PACKAGE
DRAWING
NUMBER
DGS
SPECIFICATION
TEMPERATURE
RANGE
–40°C TO +105°C
PACKAGE
MARKING
D574
ORDERING
NUMBER
DAC5574IDGS
DAC5574IDGSR
TRANSPORT MEDIA
80 Piece Tube
2500 Piece Tape and Reel
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
DGS PACKAGE
(TOPVIEW)
VOUTA 1
VOUTB 2
GND 3
VOUTC 4
VOUTD 5
DAC5574
10 A1
9 A0
8 VDD
7 SDA
6 SCL
.
PIN DESCRIPTIONS
PIN NAME
DESCRIPTION
1
VOUTA Analog output voltage from DAC A
2
VOUTB Analog output voltage from DAC B
3
GND
Ground reference point for all circuitry on the
part
4
VOUTC Analog output voltage from DAC C
5
VOUTD Analog output voltage from DAC D
6
SCL Serial clock input
7
SDA Serial data input and output
8
VDD Analog voltage supply input
9
A0 Device address select - I2C
10
A1 Device address select - I2C
ABSOLUTE MAXIMUM RATINGS(1)
VDD to GND
Digital input voltage to GND
VOUT to GND
Operating temperature range
Storage temperature range
Junction temperature range (TJ max)
Power dissipation:
Thermal impedance (ΘJA)
Thermal impedance (ΘJC)
Lead temperature, soldering: Vapor phase (60s)
Infrared (15s)
–0.3 V to +6 V
–0.3 V to VDD + 0.3 V
–0.3 V to VDD + 0.3 V
–40°C to +105°C
–65°C to +150°C
+150°C
270°C/W
77°C/W
215°C
220°C
(1) Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute
maximum conditions for extended periods may affect device reliability.
2







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)