DatasheetsPDF.com

SN74LVC1G11-EP Dataheets PDF



Part Number SN74LVC1G11-EP
Manufacturers Texas Instruments
Logo Texas Instruments
Description Single 3-Input Positive-AND Gate
Datasheet SN74LVC1G11-EP DatasheetSN74LVC1G11-EP Datasheet (PDF)

SN74LVC1G11-EP www.ti.com ... SCES787 – JULY 2009 SINGLE 3-INPUT POSITIVE AND GATE FEATURES 1 •2 Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 5.9 ns at 3.3 V • Low Power Consumption, 10-µA Max ICC • ±24-mA Output Drive .

  SN74LVC1G11-EP   SN74LVC1G11-EP


Document
SN74LVC1G11-EP www.ti.com ...................................................................................................................................................................................................... SCES787 – JULY 2009 SINGLE 3-INPUT POSITIVE AND GATE FEATURES 1 •2 Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 5.9 ns at 3.3 V • Low Power Consumption, 10-µA Max ICC • ±24-mA Output Drive at 3.3 V • Ioff Supports Partial-Power-Down Mode Operation • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS • Controlled Baseline • One Assembly/Test Site • One Fabrication Site • Available in Military (–55°C/125°C) Temperature Range(1) • Extended Product Life Cycle • Extended Product-Change Notification • Product Traceability (1) Additional temperature ranges are available - contact factory DESCRIPTION/ORDERING INFORMATION The SN74LVC1G11 performs the Boolean function Y + A • B • C or Y + A ) B ) C in positive logic. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. TA –55°C to 125°C ORDERING INFORMATION(1) PACKAGE (2) ORDERABLE PART NUMBER SOT (SC-70) – DCK Reel of 3000 SN74LVC1G11DCKREP TOP-SIDE MARKING OBF (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. (2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NanoFree is a trademark of Texas Instruments. 2 PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2009, Texas Instruments Incorporated SN74LVC1G11-EP SCES787 – JULY 2009 ...................................................................................................................................................................................................... www.ti.com FUNCTION TABLE INPUTS A B C H H H L X X X L X X X L OUTPUT Y H L L L LOGIC DIAGRAM (POSITIVE LOGIC) A B Y C Absolute Maximum Ratings(1) over operating free-air temperature range (unless otherwise noted) VCC Supply voltage range VI Input voltage range(2) VO Voltage range applied to any output in the high-impedance or power-off state(2) VO Voltage range applied to any output in the high or low state(2)(3) IIK Input clamp current VI < 0 IOK Output clamp current VO < 0 IO Continuous output current Continuous current through VCC or GND θJA Package thermal impedance(4) Tstg Storage temperature range MIN MAX –0.5 6.5 –0.5 6.5 –0.5 6.5 –0.5 VCC + 0.5 –50 –50 ±50 ±100 259 –65 150 UNIT V V V V mA mA mA mA °C/W °C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. (3) The value of VCC is provided in the recommended operating conditions table. (4) The package thermal impedance is calculated in accordance with JESD 51-7. 2 Submit Documentation Feedback Copyright © 2009, Texas Instruments Incorporated Product Folder Link(s): SN74LVC1G11-EP SN74LVC1G11-EP www.ti.com ...................................................................................................................................................................................................... SCES787 – JULY 2009 Recommended Operating Conditions(1) VCC Supply voltage VIH High-level input voltage VIL Low-level input voltage VI Input voltage VO Output voltage IOH High-level output current IOL Low-level output current Δt/Δv Input transition rise or fall rate TA Operating free-air temperature Operating Data retention only VCC = 1.65 V to 1.


SN74LVC1G11 SN74LVC1G11-EP SN74LVC1G11-Q1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)