FMCW Transceiver
AWR1243
SWRS188D – MAY 2017 – REVISED DECEMBER 2021
AWR1243 Single-Chip 77- and 79-GHz FMCW Transceiver
1 Features
• FM...
Description
AWR1243
SWRS188D – MAY 2017 – REVISED DECEMBER 2021
AWR1243 Single-Chip 77- and 79-GHz FMCW Transceiver
1 Features
FMCW transceiver
– Integrated PLL, transmitter, receiver, Baseband, and ADC
– 76- to 81-GHz coverage with 4 GHz available bandwidth
– Four receive channels – Three transmit channels (two can be used
simultaneously) – Ultra-accurate chirp engine based on fractional-
N PLL – TX power: 12 dBm – RX noise figure:
14 dB (76 to 77 GHz) 15 dB (77 to 81 GHz) – Phase noise at 1 MHz:
–95 dBc/Hz (76 to 77 GHz) –93 dBc/Hz (77 to 81 GHz) Built-in calibration and self-test
– Built-in firmware (ROM) – Self-calibrating system across process and
temperature Host interface
– Control interface with external processor over SPI
– Data interface with external processor over MIPI D-PHY and CSI2 V1.1
– Interrupts for fault reporting
Functional Safety-Compliant
– Developed for functional safety applications – Documentation available to aid ISO 26262
functional safety system design up to ASIL-D – Hardware integrity up to ASIL-B – Safety-related certification
ISO 26262 certified upto ASIL B by TUV SUD
AEC-Q100 qualified Device advanced features
– Embedded self-monitoring with no host processor involvement
– Complex baseband architecture – Embedded interference detection capability Power management
– Built-in LDO network for enhanced PSRR – I/Os support dual voltage 3.3 V/1.8 V Clock source
– Supports externally driven clock (square/sine) at 40 MHz
– Supports 40 M...
Similar Datasheet