Ultra-Fast Low-Power Precision Comparator
D Ultrafast Operation . . . 7.6 ns (Typ) D Low Positive Supply Current
10.6 mA (Typ)
D Operates From a Single 5-V Supply...
Description
D Ultrafast Operation . . . 7.6 ns (Typ) D Low Positive Supply Current
10.6 mA (Typ)
D Operates From a Single 5-V Supply or From
a Split ± 5-V Supply
D Complementary Outputs D Low Offset Voltage D No Minimum Slew Rate Requirement D Output Latch Capability D Functional Replacement to the LT1016
description
The TL3016 is an ultrafast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual ± 5-V supplies. It features extremely tight offset voltage and high gain for precision applications. It has complementary outputs that can be latched using the LATCH ENABLE terminal. Figure 1 shows the positive supply current of this comparator. The TL3016 only requires 10.6 mA (typical) to achieve a propagation delay of 7.6 ns.
The TL3016 is a pin-for-pin functional replacement for the LT1016 comparator, offering higher speed operation but consuming half the power.
AVAILABLE OPTIONS
PACKAGED DEVICES
CHIP
TA
SMALL OUTLINE†
TSSOP (PW)
FORM‡ (Y)
(D)
0°C to 70°C TL3016CD TL3016CPWLE TL3016Y
– 40°C to 85°C TL3016ID TL3016IPWLE
—
† The PW packages are available left-ended taped and reeled only. ‡ Chip forms are tested at TA = 25°C only.
TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
D AND PW PACKAGE (TOP VIEW)
VCC+ 1 IN + 2 IN – 3
VCC– 4
8 Q OUT 7 Q OUT 6 GND 5 LATCH ENABLE
symbol (each comparator)
IN + Q OUT
IN –
Q OUT
ICC – Positive Supply Current – mA
POSITIVE...
Similar Datasheet