True +3.0V to +5.5V RS-232 Transceiver
SP3222EB/SP3232EB
Data Sheet True +3.0V to +5.5V RS-232 Transceivers
General Description
The SP3222EB and SP3232EB seri...
Description
SP3222EB/SP3232EB
Data Sheet True +3.0V to +5.5V RS-232 Transceivers
General Description
The SP3222EB and SP3232EB series are RS-232 transceiver solutions intended for portable or hand-held applications such as notebook or laptop computers. The SP3222EB / SP3232EB series has a high-efficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3222EB / SP3232EB series to deliver true RS-232 performance from a single power supply ranging from 3.0V to 5.5V. The SP3222EB / SP3232EB are 2-driver / 2-receiver devices. The ESD tolerance of the SP3222EB / SP3232E devices is over ±15kV for both Human Body Model and IEC61000-4-2 Air discharge test methods. The SP3222EB device has a low-power shutdown mode where the devices’ driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1µA.
Features
■ Meets true EIA / TIA-232-F standards from a 3.0V to
5.5V power supply
■ 250kbps transmission rate under load ■ 1μA low power shutdown with receivers active
(SP3222EB)
■ Interoperable with RS-232 down to a 2.7V power source ■ Enhanced ESD specifications:
±15kV Human Body Model ±15kV IEC61000-4-2 Air Discharge ±8kV IEC61000-4-2 Contact Discharge
Ordering Information - page 18
Selection Table
Table 1: Selection Table
Device SP3222EB SP3232EB
Power Supplies 3.0V to 5.5V 3.0V to 5.5V
RS-232 Drivers
2 2
RS-232 Receivers
2 2
External Components 4 Capacitors 4 Capacitors
Shutdown Y...
Similar Datasheet