Document
Ultra fast Rectifier
INCHANGE Semiconductor
DPF30I300PA
FEATURES ·With TO-220 packaging ·Metal silicon junction, majority carrier conduction ·Low leakage current ·Low power loss, high efficiency ·Guardring for overvoltage protection ·High surge capability ·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
APPLICATIONS ·Switching power supply ·High frequency inverters ·Freewheeling diodes ·Reverse battery protection ·Polarity protection applications
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
SYMBOL
PARAMETER
VRRM VRMS
VR
IF(AV)
Peak Repetitive Reverse Voltage RMS Voltage DC Blocking Voltage
Average Rectified Forward Current @Tc=145℃
VALUE
UNI T
300
V
30
A
IFRM
Repetitive Peak Surge Current (Square Wave, 20kHz)
60
A
Nonrepetitive Peak Surge Current
IFSM
8.3 ms single half sine-wave superimposed on
390
A
rated load conditions;One shot
PD
Maximum Power Dissipation
175
W
Tj
Junction Temperature
-55~175 ℃
Tstg
Storage Temperature Range
-55~175 ℃
isc website:www.iscsemi.com
1 isc & iscsemi is registered trademark
Ultra fast Rectifier
INCHANGE Semiconductor
DPF30I300PA
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
Rth j-c
Thermal Resistance,Junction to Case
MAX 0.5
UNIT ℃/W
ELECTRICAL CHARACTERISTICS (Pulse Test: Pulse Width=300μs,Duty Cycle≤1%)
SYMBOL
PARAMETER
CONDITIONS
IF= 30A ;Tc= 25℃
VF
Maximum Instantaneous Forward Voltage
IF= 30A ;Tc= 125℃ IF= 60A ;Tc= 25℃
IF= 60A ;Tc= 125℃
IR
Maximum Instantaneous Reverse Current
VR= rated VRRM;Tc= 25℃ Tc=125℃
trr
Maximum Reverse Recovery Time
IF =1A;dIF/dt=200A/μs;VR=200V
MAX
1.17 0.98 1.37 1.21
5 250
55
UNIT V μA ns
NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
isc website:www.iscsemi.com
2 isc & iscsemi is registered trademark
.