Thyristors. 25TTS12FP Datasheet

25TTS12FP Thyristors. Datasheet pdf. Equivalent

Part 25TTS12FP
Description Thyristors
Feature isc Thyristors INCHANGE Semiconductor 25TTS12FP APPLICATIONS ·It is suitable to fit all modes of c.
Manufacture INCHANGE
Datasheet
Download 25TTS12FP Datasheet

Bulletin I2135 rev. D 03/99 SAFEIR Series 25TTS..FP PHASE C 25TTS12FP Datasheet
25TTS...FP High Voltage Series Vishay High Power Products T 25TTS12FP Datasheet
isc Thyristors INCHANGE Semiconductor 25TTS12FP APPLICATIO 25TTS12FP Datasheet
Recommendation Recommendation Datasheet 25TTS12FP Datasheet





25TTS12FP
isc Thyristors
INCHANGE Semiconductor
25TTS12FP
APPLICATIONS
·It is suitable to fit all modes of control found in applications
such as overvoltage crowbar protection,motor control circuits
in power tools and kitchen aids,in-rush current limiting circuits,
. capacitive discharge ignition, voltage regulation circuits etc.
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
MIN
UNIT
VDRM Repetitive peak off-state voltage
1200
V
VRRM Repetitive peak reverse voltage
1200
V
IT(AV) Average on-stage current
16
A
IT(RMS) RMS on-state current
25
A
ITSM Surge non-repetitive on-state current
TP=10ms
300
A
PG(AV) Average gate power dissipation
over any 20 ms period
2.0
W
Tj
Operating junction temperature
-40~125
Tstg Storage temperature
-40~150
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark



25TTS12FP
isc Thyristors
INCHANGE Semiconductor
25TTS12FP
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
MIN MAX UNIT
IRRM Repetitive peak reverse current VRM=VRRM
IDRM Repetitive peak off-state current VDM=VDRM
Tj=25
Tj=125
Tj=25
Tj=125
0.5 mA
10 mA
0.5 mA
10 mA
VTM On-state voltage
ITM= 16A
1.25 V
IGT
Gate-trigger current
VD = 6 V;resistive load
45 mA
VGT Gate-trigger voltage
VD = 6 V;resistive load
2
V
Rth(j-c) Thermal resistance
Junction to case
1.5 /W
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not designed
for use in equipment which require specialized quality and/or reliability, or in equipment which
could have applications in hazardous environments, aerospace industry, or medical field. Please
contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)