Thyristors. CLA80E1200HF Datasheet

CLA80E1200HF Thyristors. Datasheet pdf. Equivalent

Part CLA80E1200HF
Description Thyristors
Feature isc Thyristors INCHANGE Semiconductor CLA80E1200HF APPLICATIONS ·It is suitable to fit all modes o.
Manufacture INCHANGE
Datasheet
Download CLA80E1200HF Datasheet

High Efficiency Thyristor Single Thyristor Part number CLA80 CLA80E1200HF Datasheet
isc Thyristors INCHANGE Semiconductor CLA80E1200HF APPLICA CLA80E1200HF Datasheet
Recommendation Recommendation Datasheet CLA80E1200HF Datasheet





CLA80E1200HF
isc Thyristors
INCHANGE Semiconductor
CLA80E1200HF
APPLICATIONS
·It is suitable to fit all modes of control found in applications
such as overvoltage crowbar protection,motor control circuits
in power tools and kitchen aids,in-rush current limiting circuits,
capacitive discharge ignition, voltage regulation circuits etc.
·Minimum Lot-to-Lot variations for robust device performance
and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak reverse voltage
IT(AV) Average on-stage current
IT(RMS) RMS on-state current
ITSM Surge non-repetitive on-state current
TP=10ms
PG(AV) Average gate power dissipation
Tj
Operating junction temperature
Tstg Storage temperature
MIN
UNIT
1200
V
1200
V
80
A
126
A
900
A
0.5
W
-40~125
-40~150
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark



CLA80E1200HF
isc Thyristors
INCHANGE Semiconductor
CLA80E1200HF
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM Repetitive peak reverse current VRM=1200V
IDRM Repetitive peak off-state current VDM=1200V
Tj=25
Tj=125
Tj=25
Tj=125
VTM On-state voltage
ITM= 80A
MIN MAX UNIT
50 μA
5
mA
50 μA
5
mA
1.4
V
IGT
Gate-trigger current
VD = 6 V
38 mA
VGT Gate-trigger voltage
VD = 6 V
1.5
V
Rth(j-c) Thermal resistance
Junction to case
0.2 /W
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not designed
for use in equipment which require specialized quality and/or reliability, or in equipment which
could have applications in hazardous environments, aerospace industry, or medical field. Please
contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)