Thyristors. MCR72-8 Datasheet

MCR72-8 Thyristors. Datasheet pdf. Equivalent

Part MCR72-8
Description Thyristors
Feature isc Thyristors INCHANGE Semiconductor MCR72-8 APPLICATIONS ·It is suitable to fit all modes of con.
Manufacture INCHANGE
Datasheet
Download MCR72-8 Datasheet

MCR72-3, MCR72-6, MCR72-8 Preferred Device Sensitive Gate Si MCR72-8 Datasheet
Thyristors 8Amps Sen SCR MCR72-3, MCR72-6, MCR72-8 Pb Des MCR72-8 Datasheet
MCR72 SERIES High-reliability discrete products and enginee MCR72-8 Datasheet
isc Thyristors INCHANGE Semiconductor MCR72-8 APPLICATIONS MCR72-8 Datasheet
Recommendation Recommendation Datasheet MCR72-8 Datasheet





MCR72-8
isc Thyristors
INCHANGE Semiconductor
MCR72-8
APPLICATIONS
·It is suitable to fit all modes of control found in applications
such as overvoltage crowbar protection,motor control circuits
in power tools and kitchen aids,in-rush current limiting circuits,
. capacitive discharge ignition, voltage regulation circuits etc.
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM
IT(RMS)
ITSM
Repetitive peak reverse voltage
Average on-stage current
@Tc=83
Surge non-repetitive on-state current
Tj=110
TP=10ms
PG(AV) Average gate power dissipation
over any 20 ms period
Tj
Operating junction temperature
Tstg Storage temperature
MIN
600
600
8
100
0.75
-40~110
-40~150
UNIT
V
V
A
A
W
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
Repetitive peak reverse current VRM=VRRM,RGK= 1KΩ
Tj=25
Tj=110
Tj=25
IDRM
Repetitive peak off-state current VDM=VDRM, RGK= 1KΩ
Tj=110
VTM On-state voltage
ITM= 16A
IGT
Gate-trigger current
VD = 12 V;RL=100Ω
VGT Gate-trigger voltage
VD = 12 V;RL=100Ω
Rth(j-c) Thermal resistance
Junction to case
MIN MAX UNIT
10 μA
500 μA
10 μA
500 μA
2.0 V
200 mA
1.5 V
2.2 /W
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark



MCR72-8
INCHANGE Semiconductor
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not designed
for use in equipment which require specialized quality and/or reliability, or in equipment which
could have applications in hazardous environments, aerospace industry, or medical field. Please
contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)