LP8340
www.ti.com
SNVS221D – FEBRUARY 2003 – REVISED APRIL 2013
LP8340 Low Dropout, Low IQ, 1.0A CMOS Linear Regulato...
LP8340
www.ti.com
SNVS221D – FEBRUARY 2003 – REVISED APRIL 2013
LP8340 Low Dropout, Low IQ, 1.0A CMOS Linear
Regulator
Check for Samples: LP8340
FEATURES
1
2 ±1.5% Typical VOUT Tolerance 420mV Typical Dropout @ 1.0A (VO = 5V) Wide Operating Range 2.7V to 10V Internal 1.0A PMOS Output
Transistor 19µA Typical Quiescent Current Thermal Overload Limiting Foldback Current Limiting Zener Trimmed Bandgap Reference Space Saving WSON package Temperature Range
– LP8340C 0°C to 125°C – LP8340I −40°C to 125°C
APPLICATIONS
Hard Disk Drives Notebook Computers Battery Powered Electronics Portable Instrumentation
DESCRIPTION
The LP8340 low-dropout CMOS linear
regulator is available in 5V, 3.3V, 2.5V, 1.8V and adjustable output versions. Packaged in the 6ld WSON package and 3ld PFM. The LP8340 can deliver up to 1.0A output current.
Typical dropout voltage is 420mV at 1.0A for the 5.0V version, 540mV at 1.0A for the 3.3V version, 670mV at 1.0A for the 2.5V version and 680mV at 800mA for the 1.8V version.
The LP8340 includes a zener trimmed bandgap voltage reference, foldback current limiting and thermal overload limiting.
The LP8340 features a PMOS output
transistor which unlike
PNP type low dropout
regulators requires no base drive current. This allows the device ground current to remain less than 50µA over operating temperature, supply voltage and irrespective of the load current.
Typical Applications
VIN
1.0µF Ceramic
VIN
VOUT
VOUT Sense (LLP only)
VOUT...