LOW-POWER DIFFERENTIAL COMPARATORS
D Low Power Drain . . . 900 μW Typical With
5-V Supply
D Operates From ±15 V or From a Single
Supply as Low as 3 V
D Out...
Description
D Low Power Drain . . . 900 μW Typical With
5-V Supply
D Operates From ±15 V or From a Single
Supply as Low as 3 V
D Output Drive Capability of 25 mA D Emitter Output Can Swing Below Negative
Supply
D Response Time . . . 1.2 μs Typ D Low Input Currents:
Offset Current . . . 2 nA Typ Bias Current . . . 15 nA Typ
D Wide Common-Mode Input Range:
−14.5 V to 13.5 V Using ±15-V Supply
D Offset Balancing and Strobe Capability D Same Pinout as LM211, LM311 D Designed To Be Interchangeable With
Industry-Standard LP311
LP211, LP311 LOW-POWER DIFFERENTIAL COMPARATORS
WITH STROBES
SLCS003D − JUNE 1987 − REVISED SEPTEMBER 2003
LP211 . . . D PACKAGE LP311 . . . D, P, OR PS PACKAGE
(TOP VIEW)
EMIT OUT 1 IN+ 2 IN− 3
VCC− 4
8 VCC+ 7 COL OUT 6 BAL/STRB 5 BALANCE
description/ordering information
The LP211 and LP311 devices are low-power versions of the industry-standard LM211 and LM311 devices. They take advantage of stable, high-value, ion-implanted resistors to perform the same function as the LM311 series, with a 30:1 reduction in power consumption, but only a 6:1 slowdown in response time. They are well suited for battery-powered applications and all other applications where fast response times are not needed. They operate over a wide range of supply voltages, from ±18 V down to a single 3-V supply with less than 300-μA current drain, but are still capable of driving a 25-mA load. The LP211 and LP311 are quite easy to apply free of oscillation if ordinary precautions are taken to minimi...
Similar Datasheet