Thyristor. BCR10CM-12LB Datasheet

BCR10CM-12LB Thyristor. Datasheet pdf. Equivalent

Part BCR10CM-12LB
Description Thyristor
Feature isc Thyristors INCHANGE Semiconductor BCR10CM-12LB DESCRIPTION ·With TO-220 packaging ·Operating i.
Manufacture INCHANGE
Datasheet
Download BCR10CM-12LB Datasheet

isc Thyristors INCHANGE Semiconductor BCR10CM-12LB DESCRIP BCR10CM-12LB Datasheet
BCR10CM-12LB 600V - 10A - Triac Medium Power Use Preliminar BCR10CM-12LB Datasheet
Recommendation Recommendation Datasheet BCR10CM-12LB Datasheet





BCR10CM-12LB
isc Thyristors
INCHANGE Semiconductor
BCR10CM-12LB
DESCRIPTION
·With TO-220 packaging
·Operating in 3 quadrants
·High commutation capability
·Minimum Lot-to-Lot variations for robust device performance
and reliable operation
APPLICATIONS
·Switching applications
·Phase control
·Static switching on inductive or resistive load
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
MAX
UNIT
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak reverse voltage
IT(RSM) Average on-state current
600
V
600
V
@Tc=128
10
A
ITSM Surge non-repetitive on-state current
60HZ
100
A
PG(AV) Average gate power dissipation ( over any 20 ms period )
Tj
Operating junction temperature
Tstg Storage temperature
0.5
W
-40~125
-40~150
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark



BCR10CM-12LB
isc Thyristors
INCHANGE Semiconductor
BCR10CM-12LB
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
IDRM
Repetitive peak reverse current VR=VRRM Rated;
Repetitive peak off-state current VD=VDRM Rated;
Tj=125
VTM On-state voltage
IGT
Gate-trigger current
VGT Gate-trigger voltage
IT=15A
VD =6V;RL=6Ω;RG=330Ω Ⅱ
VD =6V;RL=6Ω;RG=330Ω;
Rth (j-mb) Junction to mounting base
Half cycle
MIN MAX UNIT
2.0 mA
1.5 V
30
30 mA
30
1.5 V
1.8 /W
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not designed
for use in equipment which require specialized quality and/or reliability, or in equipment which
could have applications in hazardous environments, aerospace industry, or medical field. Please
contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)