Document
isc Triacs
BT136S-600
DESCRIPTION ·High blocking voltage capability ·Surface-mountable package ·Low holding current for low current loads and lowest
EMI at commutation. ·Triggering in all four quadrants ·Very sensitive gate ·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
FEATURES ·General purpose motor control ·General purpose switching
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
SYMBOL
PARAMETER
VDRM IT(RMS)
Repetitive peak off-state voltage RMS on-state current (full sine wave;Tmb≤107℃)
Non-repetitive peak on-state current(Tj=25℃;Tp=20ms) ITSM
Non-repetitive peak on-state current(Tj=25℃;Tp=16.7ms)
I2t dIT/dt
I2t for fusing tp=10ms;sine-wave pulse
Rate of rise of on-state current Ⅰ-Ⅱ-Ⅲ IT=6A,IG=0.2A,dIG/dt=0.2A/us Ⅳ
IGM VGM PGM PG(AV) Tj Tstg
Peak gate current Peak gate voltage Peak gate power dissipation Average gate power dissipation Operating junction temperature Storage temperature
MIN
600 4 25
27 3.1 50 10 2 5 5 0.5 125 -40~150
UNIT
V A A
A A2S A/us A/us
A V W W ℃ ℃
isc website: www.iscsemi.com
isc & iscsemi is registered trademark
isc Triacs
ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IDRM
Repetitive peak off-state current
VD=VDRM,
VD=VDRM, Tj=125℃
Ⅰ
IGT
Gate trigger current
Ⅱ
VD=12V; IT= 0.1A, RL= 30Ω Ⅲ
Ⅳ
VTM On-state voltage
IH
Holding current
VGT Gate trigger voltage
IT= 5A IGT= 0.1A, VD= 12V VD=12V; IT= 0.1A
BT136S-600
MIN MAX UNIT
0.01 0.5
mA
5
5 mA
5
10
1.7 V
12 mA
1.5 V
NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
isc website: www.iscsemi.com
isc & iscsemi is registered trademark
.