Triac. BT137X-600D Datasheet

BT137X-600D Triac. Datasheet pdf. Equivalent

Part BT137X-600D
Description Triac
Feature isc Triacs BT137X-600D FEATURES ·With TO-220F package ·Glass passivated triacs in a plasticenvelop.
Manufacture INCHANGE
Datasheet
Download BT137X-600D Datasheet

TO-220F BT137X-600D 4Q Triac 1 May 2015 Product data sheet BT137X-600D Datasheet
BT137X-600D 4Q Triac Rev.01 - 18 April 2018 Product data sh BT137X-600D Datasheet
isc Triacs BT137X-600D FEATURES ·With TO-220F package ·Gla BT137X-600D Datasheet
Recommendation Recommendation Datasheet BT137X-600D Datasheet





BT137X-600D
isc Triacs
BT137X-600D
FEATURES
·With TO-220F package
·Glass passivated triacs in a plasticenvelope, for use
in general purposebidirectional switching and phase
control applications, which are intendedto be interfaced
directly to microcontrollers, logic integrated circuits and
other low power gate trigger circuits.
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak off-state voltage
IT(RMS) RMS on-state current (full sine wave)
ITSM Non-repetitive peak on-state current
PGM Peak gate power dissipation
PG(AV) Average gate power dissipation
Tj
Operating junction temperature
Tstg Storage temperature
MIN
600
600
8
65
5
0.5
125
-45~150
UNIT
V
V
A
A
W
W
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
Repetitive peak reverse current
VR=VRRM,
VR=VRRM, Tj=110
IDRM
Repetitive peak off-state current
VD=VDRM,
VD=VDRM, Tj=110
IGT
Gate trigger current
VD=12V; IT= 0.1A, RL= 30Ω
VTM On-state voltage
IH
Holding current
VGT Gate trigger voltage
IT= 10A
IGT= 0.1A, VD= 12V
VD=12V; RL= 30Ω all quadrant
MIN MAX UNIT
0.02
0.5
mA
0.02
0.5
mA
5
5
mA
5
10
1.65 V
10 mA
1.5 V
isc websitewww.iscsemi.com
1 isc & iscsemi is registered trademark



BT137X-600D
isc Triacs
BT137X-600D
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not
designed for use in equipment which require specialized quality and/or reliability, or in equipment
which could have applications in hazardous environments, aerospace industry, or medical
field. Please contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
2 isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)