Triac. BT138-600E Datasheet

BT138-600E Triac. Datasheet pdf. Equivalent

Part BT138-600E
Description Triac
Feature isc Triacs BT138-600E FEATURES ·With TO-220 package ·Glass passivated triacs in a plastic envelope.
Manufacture INCHANGE
Datasheet
Download BT138-600E Datasheet

TO-220AB BT138-600E 4Q Triac 30 August 2013 Product data s BT138-600E Datasheet
TM BT138-600E HPM Sensitive Gate Triacs HAOPIN MICROELECT BT138-600E Datasheet
BT138 Rev.E Mar.-2016 / Descriptions TO-220  Triac in a TO BT138-600E Datasheet
isc Triacs BT138-600E FEATURES ·With TO-220 package ·Glass BT138-600E Datasheet
Recommendation Recommendation Datasheet BT138-600E Datasheet





BT138-600E
isc Triacs
BT138-600E
FEATURES
·With TO-220 package
·Glass passivated triacs in a plastic envelope, Intended
for use in general purpose bidirectional switching and
phase control applications, where high sensitivity is
required in all our quadrants.
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak off-state voltage
IT(RMS) RMS on-state current (full sine wave)
ITSM Non-repetitive peak on-state current
PGM Peak gate power dissipation
PG(AV) Average gate power dissipation
Tj
Operating junction temperature
Tstg Storage temperature
MIN
600
600
12
95
5
0.5
125
-45~150
UNIT
V
V
A
A
W
W
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
Repetitive peak reverse current
VR=VRRM,
VR=VRRM, Tj=125
IDRM
Repetitive peak off-state current
VD=VDRM,
VD=VDRM, Tj=125
IGT
Gate trigger current
VD=12V; IT= 0.1A, RL= 30Ω
VTM On-state voltage
IH
Holding current
VGT Gate trigger voltage
IT= 15A
IGT= 0.1A, VD= 12V
VD=12V; RL= 30Ω all quadrant
MIN MAX UNIT
0.02
0.5
mA
0.02
0.5
mA
10
10
mA
10
25
1.65 V
30 mA
1.5 V
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark



BT138-600E
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not designed
for use in equipment which require specialized quality and/or reliability, or in equipment which
could have applications in hazardous environments, aerospace industry, or medical field. Please
contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)