Triac. BTA08-600BW Datasheet

BTA08-600BW Triac. Datasheet pdf. Equivalent

Part BTA08-600BW
Description Triac
Feature isc Triacs BTA08-600BW FEATURES ·With TO-220AB insulated package ·Suitables for general purpose ap.
Manufacture INCHANGE
Datasheet
Download BTA08-600BW Datasheet

BTA08, BTB08, T810, T835, T850 Snubberless™, logic level and BTA08-600BW Datasheet
isc Triacs BTA08-600BW FEATURES ·With TO-220AB insulated p BTA08-600BW Datasheet
BTA08-600BW3G, BTA08-800BW3G Triacs Silicon Bidirectional Th BTA08-600BW3G Datasheet
Recommendation Recommendation Datasheet BTA08-600BW Datasheet





BTA08-600BW
isc Triacs
BTA08-600BW
FEATURES
·With TO-220AB insulated package
·Suitables for general purpose applications where gate high sensitivity is
required. Application on 4Q such as phase control and static switching.
·Minimum Lot-to-Lot variations for robust device performance and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
MIN
UNIT
VDRM Repetitive peak off-state voltage
600
V
VRRM Repetitive peak reverse voltage
600
V
IT(RMS) RMS on-state current (full sine wave)Tj=105
8
A
ITSM Non-repetitive peak on-state current tp=20ms
80
A
Tj
Operating junction temperature
110
Tstg Storage temperature
-45~150
Rth(j-c) Thermal resistance, junction to case
4.3 /W
Rth(j-a) Thermal resistance, junction to ambient
60
/W
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
Repetitive peak reverse current
VR=VRRM,
VR=VRRM, Tj=110
IDRM
Repetitive peak off-state current
VD=VDRM,
VD=VDRM, Tj=110
IGT
Gate trigger current
VD=12V; RL= 33Ω
IH
Holding current
IGT= 0.1A, Gate Open
VGT Gate trigger voltage all quadrant VD=12V; RL= 33Ω
VTM On-state voltage
IT= 11A; tp= 380μs
MAX
0.01
0.5
0.01
0.5
50
UNIT
mA
mA
50 mA
50
50 mA
1.3
V
1.55 V
isc websitewww.iscsemi.cn
isc&iscsemi is registered trademark



BTA08-600BW
isc Triacs
BTA08-600BW
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not
designed for use in equipment which require specialized quality and/or reliability, or in equipment
which could have applications in hazardous environments, aerospace industry, or medical
field. Please contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.cn
isc&iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)