Triac. BTA10-600 Datasheet

BTA10-600 Triac. Datasheet pdf. Equivalent

Part BTA10-600
Description Triac
Feature isc Triacs BTA10-600 FEATURES ·With TO-220AB insulated package ·Suitable for general purpose AC sw.
Manufacture INCHANGE
Datasheet
Download BTA10-600 Datasheet

isc Triacs BTA10-600 FEATURES ·With TO-220AB insulated pac BTA10-600 Datasheet
isc Triacs BTA10-600B FEATURES ·With TO-220AB insulated pa BTA10-600B Datasheet
BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless™, logic BTA10-600B Datasheet
BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless™, logic BTA10-600BW Datasheet
isc Triacs BTA10-600BW FEATURES ·With TO-220AB insulated p BTA10-600BW Datasheet
isc Triacs INCHANGE Semiconductor BTA10-600C FEATURES ·Wit BTA10-600C Datasheet
BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless™, logic BTA10-600C Datasheet
isc Triacs BTA10-600CW FEATURES ·With TO-220AB insulated p BTA10-600CW Datasheet
BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless™, logic BTA10-600CW Datasheet
Features ■ Low IH: – 13 mA max ■ High surge current: – ITSM BTA10-600GP Datasheet
Recommendation Recommendation Datasheet BTA10-600 Datasheet





BTA10-600
isc Triacs
BTA10-600
FEATURES
·With TO-220AB insulated package
·Suitable for general purpose AC switching. Which can be
used as an ON/OFF function in applications such as static relays,
heating regulation,induction motor starting circuits. Or for phase
control operation in light dimmers, motor speed controllers etc.
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak off-state voltage
IT(RMS) RMS on-state current (full sine wave)
ITSM Non-repetitive peak on-state current tp=20ms
Tj
Operating junction temperature
Tstg Storage temperature
Rth(j-c) Thermal resistance, junction to case
Rth(j-a) Thermal resistance, junction to ambient
MIN
600
600
10
100
125
-40~150
2.4
60
UNIT
V
V
A
A
/W
/W
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
Repetitive peak reverse current
VR=VRRM,
VR=VRRM, Tj=110
IDRM
Repetitive peak off-state current
VD=VDRM,
VD=VDRM, Tj=110
IGT
Gate trigger current
VD=12V; RL= 33Ω
IH
Holding current
IGT= 0.5A, Gate Open
VGT Gate trigger voltage all quadrant VD=12V; RL= 33Ω
VTM On-state voltage
IT= 14A; tp= 380μs
MAX
0.005
1
0.005
1
50
UNIT
mA
mA
50
mA
50
100
50 mA
1.3
V
1.55 V
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark



BTA10-600
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not designed
for use in equipment which require specialized quality and/or reliability, or in equipment which
could have applications in hazardous environments, aerospace industry, or medical field. Please
contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)