Document
isc Thyristors
INCHANGE Semiconductor
BTA412Y-800ET
DESCRIPTION ·With TO-220 packaging ·High operating junction temperature ·Very high commutation performancemaximized at each
gate sensitivity ·Minimum Lot-to-Lot variations for robust device performance
and reliable operation
APPLICATIONS ·High temperature, high power motor control ·Solid state relays;heating and cooking appliances ·Switching applications
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak reverse voltage
IT(RMS) RMS on-state current
@Tc=118℃
ITSM Surge non-repetitive on-state current
50HZ 60HZ
PG(AV) Average gate power dissipation ( over any 20 ms period )
Tj
Operating junction temperature
Tstg Storage temperature
MIN
UNIT
800
V
800
V
12
A
140 150
A
0.5
W
-40~150 ℃
-40~150 ℃
isc website:www.iscsemi.com
isc & iscsemi is registered trademark
isc Thyristors
INCHANGE Semiconductor
BTA412Y-800ET
ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
MIN MAX UNIT
IRRM Repetitive peak reverse current IDRM Repetitive peak off-state current
VR=VRRM Rated; Tj=25℃ VD=VDRM Rated; Tj=125℃
0.01 2
mA
VTM On-state voltage
IGT
Gate-trigger current
VGT Gate-trigger voltage
IT=17A,tP=380μs
Ⅰ
VD =12V;IT=0.1A
Ⅱ
Ⅲ
VD =12V;IT=0.1A
1.6 V
10 10 mA 10
1
V
NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
isc website:www.iscsemi.com
isc & iscsemi is registered trademark
.