Document
isc Triacs
BTB41
FEATURES ·With TOP3 non insulated package ·Suitable for general purpose where high surge current capability is required.
Application such as phase control and tatic switching on inductive or resistive load. ·Minimum Lot-to-Lot variations for robust device performance and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak reverse voltage
IT(RMS) RMS on-state current (full sine wave)Tj=80℃
ITSM Non-repetitive peak on-state current tp=20ms
Tj
Operating junction temperature
Tstg Storage temperature
PG(AV) Average gate power dissipation(Tj=125℃)
Rth(j-c) Thermal resistance, junction to case
Rth(j-a) Thermal resistance, junction to ambient
MIN
UNIT
800
V
800
V
41
A
410
A
125
℃
-40~150 ℃
1
W
0.9 ℃/W
50
℃/W
ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
Repetitive peak reverse current
VR=VRRM,
VR=VRRM, Tj=125℃
IDRM
Repetitive peak off-state current
VD=VDRM,
VD=VDRM, Tj=125℃
Ⅰ
IGT
Gate trigger current
Ⅱ VD=12V; RL= 100Ω
Ⅲ
Ⅳ
IH
Holding current
IGT= 0.5A, Gate Open
VGT Gate trigger voltage all quadrant VD=12V; RL= 100Ω
VTM On-state voltage
ITM= 60A; tp= 380μs
MAX
0.005 5.0
0.005 5.0
50
UNIT
mA mA
50 mA
50
100
80 mA
1.3
V
1.55 V
isc website: www.iscsemi.com
isc & iscsemi is registered trademark
NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
isc website: www.iscsemi.com
isc & iscsemi is registered trademark
.